1 /* Establishing and handling network connections.
2 Copyright (C) 1995, 1996, 1997, 2001, 2002 Free Software Foundation, Inc.
4 This file is part of GNU Wget.
6 GNU Wget is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
11 GNU Wget is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with Wget; if not, write to the Free Software
18 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 In addition, as a special exception, the Free Software Foundation
21 gives permission to link the code of its release of Wget with the
22 OpenSSL project's "OpenSSL" library (or with modified versions of it
23 that use the same license as the "OpenSSL" library), and distribute
24 the linked executables. You must obey the GNU General Public License
25 in all respects for all of the code used other than "OpenSSL". If you
26 modify this file, you may extend this exception to your version of the
27 file, but you are not obligated to do so. If you do not wish to do
28 so, delete this exception statement from your version. */
40 # include <sys/socket.h>
42 # include <netinet/in.h>
44 # include <arpa/inet.h>
46 #endif /* not WINDOWS */
50 #ifdef HAVE_SYS_SELECT_H
51 # include <sys/select.h>
52 #endif /* HAVE_SYS_SELECT_H */
60 /* Define sockaddr_storage where unavailable (presumably on IPv4-only
64 # ifndef HAVE_STRUCT_SOCKADDR_STORAGE
65 # define sockaddr_storage sockaddr_in
67 #endif /* ENABLE_IPV6 */
69 /* Fill SA as per the data in IP and PORT. SA shoult point to struct
70 sockaddr_storage if ENABLE_IPV6 is defined, to struct sockaddr_in
74 sockaddr_set_data (struct sockaddr *sa, const ip_address *ip, int port)
80 struct sockaddr_in *sin = (struct sockaddr_in *)sa;
82 sin->sin_family = AF_INET;
83 sin->sin_port = htons (port);
84 sin->sin_addr = ADDRESS_IPV4_IN_ADDR (ip);
90 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sa;
92 sin6->sin6_family = AF_INET6;
93 sin6->sin6_port = htons (port);
94 sin6->sin6_addr = ADDRESS_IPV6_IN6_ADDR (ip);
95 #ifdef HAVE_SOCKADDR_IN6_SCOPE_ID
96 sin6->sin6_scope_id = ADDRESS_IPV6_SCOPE (ip);
100 #endif /* ENABLE_IPV6 */
106 /* Get the data of SA, specifically the IP address and the port. If
107 you're not interested in one or the other information, pass NULL as
111 sockaddr_get_data (const struct sockaddr *sa, ip_address *ip, int *port)
113 switch (sa->sa_family)
117 struct sockaddr_in *sin = (struct sockaddr_in *)sa;
120 ip->type = IPV4_ADDRESS;
121 ADDRESS_IPV4_IN_ADDR (ip) = sin->sin_addr;
124 *port = ntohs (sin->sin_port);
130 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sa;
133 ip->type = IPV6_ADDRESS;
134 ADDRESS_IPV6_IN6_ADDR (ip) = sin6->sin6_addr;
135 #ifdef HAVE_SOCKADDR_IN6_SCOPE_ID
136 ADDRESS_IPV6_SCOPE (ip) = sin6->sin6_scope_id;
140 *port = ntohs (sin6->sin6_port);
149 /* Return the size of the sockaddr structure depending on its
153 sockaddr_size (const struct sockaddr *sa)
155 switch (sa->sa_family)
158 return sizeof (struct sockaddr_in);
161 return sizeof (struct sockaddr_in6);
168 /* Resolve the bind address specified via --bind-address and store it
169 to SA. The resolved value is stored in a static variable and
170 reused after the first invocation of this function.
172 Returns true on success, false on failure. */
175 resolve_bind_address (struct sockaddr *sa)
177 struct address_list *al;
179 /* Make sure this is called only once. opt.bind_address doesn't
180 change during a Wget run. */
181 static bool called, should_bind;
182 static ip_address ip;
186 sockaddr_set_data (sa, &ip, 0);
191 al = lookup_host (opt.bind_address, LH_BIND | LH_SILENT);
194 /* #### We should be able to print the error message here. */
195 logprintf (LOG_NOTQUIET,
196 _("%s: unable to resolve bind address `%s'; disabling bind.\n"),
197 exec_name, opt.bind_address);
202 /* Pick the first address in the list and use it as bind address.
203 Perhaps we should try multiple addresses in succession, but I
204 don't think that's necessary in practice. */
205 ip = *address_list_address_at (al, 0);
206 address_list_release (al);
208 sockaddr_set_data (sa, &ip, 0);
215 const struct sockaddr *addr;
221 connect_with_timeout_callback (void *arg)
223 struct cwt_context *ctx = (struct cwt_context *)arg;
224 ctx->result = connect (ctx->fd, ctx->addr, ctx->addrlen);
227 /* Like connect, but specifies a timeout. If connecting takes longer
228 than TIMEOUT seconds, -1 is returned and errno is set to
232 connect_with_timeout (int fd, const struct sockaddr *addr, socklen_t addrlen,
235 struct cwt_context ctx;
238 ctx.addrlen = addrlen;
240 if (run_with_timeout (timeout, connect_with_timeout_callback, &ctx))
245 if (ctx.result == -1 && errno == EINTR)
250 /* Connect via TCP to the specified address and port.
252 If PRINT is non-NULL, it is the host name to print that we're
256 connect_to_ip (const ip_address *ip, int port, const char *print)
258 struct sockaddr_storage ss;
259 struct sockaddr *sa = (struct sockaddr *)&ss;
262 /* If PRINT is non-NULL, print the "Connecting to..." line, with
263 PRINT being the host name we're connecting to. */
266 const char *txt_addr = pretty_print_address (ip);
267 if (print && 0 != strcmp (print, txt_addr))
268 logprintf (LOG_VERBOSE, _("Connecting to %s|%s|:%d... "),
269 escnonprint (print), txt_addr, port);
271 logprintf (LOG_VERBOSE, _("Connecting to %s:%d... "), txt_addr, port);
274 /* Store the sockaddr info to SA. */
275 sockaddr_set_data (sa, ip, port);
277 /* Create the socket of the family appropriate for the address. */
278 sock = socket (sa->sa_family, SOCK_STREAM, 0);
282 #if defined(ENABLE_IPV6) && defined(IPV6_V6ONLY)
285 /* In case of error, we will go on anyway... */
286 int err = setsockopt (sock, IPPROTO_IPV6, IPV6_V6ONLY, &on, sizeof (on));
289 DEBUGP (("Failed setting IPV6_V6ONLY: %s", strerror (errno)));
293 /* For very small rate limits, set the buffer size (and hence,
294 hopefully, the kernel's TCP window size) to the per-second limit.
295 That way we should never have to sleep for more than 1s between
297 if (opt.limit_rate && opt.limit_rate < 8192)
299 int bufsize = opt.limit_rate;
301 bufsize = 512; /* avoid pathologically small values */
303 setsockopt (sock, SOL_SOCKET, SO_RCVBUF,
304 (void *)&bufsize, (socklen_t)sizeof (bufsize));
306 /* When we add limit_rate support for writing, which is useful
307 for POST, we should also set SO_SNDBUF here. */
310 if (opt.bind_address)
312 /* Bind the client side of the socket to the requested
314 struct sockaddr_storage bind_ss;
315 struct sockaddr *bind_sa = (struct sockaddr *)&bind_ss;
316 if (resolve_bind_address (bind_sa))
318 if (bind (sock, bind_sa, sockaddr_size (bind_sa)) < 0)
323 /* Connect the socket to the remote endpoint. */
324 if (connect_with_timeout (sock, sa, sockaddr_size (sa),
325 opt.connect_timeout) < 0)
331 logprintf (LOG_VERBOSE, _("connected.\n"));
332 DEBUGP (("Created socket %d.\n", sock));
337 /* Protect errno from possible modifications by close and
339 int save_errno = errno;
343 logprintf (LOG_VERBOSE, _("failed: %s.\n"), strerror (errno));
349 /* Connect via TCP to a remote host on the specified port.
351 HOST is resolved as an Internet host name. If HOST resolves to
352 more than one IP address, they are tried in the order returned by
353 DNS until connecting to one of them succeeds. */
356 connect_to_host (const char *host, int port)
361 struct address_list *al = lookup_host (host, 0);
367 address_list_get_bounds (al, &start, &end);
368 for (i = start; i < end; i++)
370 const ip_address *ip = address_list_address_at (al, i);
371 sock = connect_to_ip (ip, port, host);
375 address_list_set_connected (al);
376 address_list_release (al);
380 /* The attempt to connect has failed. Continue with the loop
381 and try next address. */
383 address_list_set_faulty (al, i);
386 /* Failed to connect to any of the addresses in AL. */
388 if (address_list_connected_p (al))
390 /* We connected to AL before, but cannot do so now. That might
391 indicate that our DNS cache entry for HOST has expired. */
392 address_list_release (al);
393 al = lookup_host (host, LH_REFRESH);
396 address_list_release (al);
401 /* Create a socket, bind it to local interface BIND_ADDRESS on port
402 *PORT, set up a listen backlog, and return the resulting socket, or
405 BIND_ADDRESS is the address of the interface to bind to. If it is
406 NULL, the socket is bound to the default address. PORT should
407 point to the port number that will be used for the binding. If
408 that number is 0, the system will choose a suitable port, and the
409 chosen value will be written to *PORT.
411 Calling accept() on such a socket waits for and accepts incoming
415 bind_local (const ip_address *bind_address, int *port)
418 int family = AF_INET;
419 struct sockaddr_storage ss;
420 struct sockaddr *sa = (struct sockaddr *)&ss;
422 /* For setting options with setsockopt. */
424 void *setopt_ptr = (void *)&setopt_val;
425 socklen_t setopt_size = sizeof (setopt_val);
428 if (bind_address->type == IPV6_ADDRESS)
432 sock = socket (family, SOCK_STREAM, 0);
437 setsockopt (sock, SOL_SOCKET, SO_REUSEADDR, setopt_ptr, setopt_size);
441 sockaddr_set_data (sa, bind_address, *port);
442 if (bind (sock, sa, sockaddr_size (sa)) < 0)
447 DEBUGP (("Local socket fd %d bound.\n", sock));
449 /* If *PORT is 0, find out which port we've bound to. */
452 socklen_t addrlen = sockaddr_size (sa);
453 if (getsockname (sock, sa, &addrlen) < 0)
455 /* If we can't find out the socket's local address ("name"),
456 something is seriously wrong with the socket, and it's
457 unusable for us anyway because we must know the chosen
462 sockaddr_get_data (sa, NULL, port);
463 DEBUGP (("binding to address %s using port %i.\n",
464 pretty_print_address (bind_address), *port));
466 if (listen (sock, 1) < 0)
474 /* Like a call to accept(), but with the added check for timeout.
476 In other words, accept a client connection on LOCAL_SOCK, and
477 return the new socket used for communication with the client.
478 LOCAL_SOCK should have been bound, e.g. using bind_local().
480 The caller is blocked until a connection is established. If no
481 connection is established for opt.connect_timeout seconds, the
482 function exits with an error status. */
485 accept_connection (int local_sock)
489 /* We don't need the values provided by accept, but accept
490 apparently requires them to be present. */
491 struct sockaddr_storage ss;
492 struct sockaddr *sa = (struct sockaddr *)&ss;
493 socklen_t addrlen = sizeof (ss);
495 if (opt.connect_timeout)
497 int test = select_fd (local_sock, opt.connect_timeout, WAIT_FOR_READ);
503 sock = accept (local_sock, sa, &addrlen);
504 DEBUGP (("Accepted client at socket %d.\n", sock));
508 /* Get the IP address associated with the connection on FD and store
509 it to IP. Return true on success, false otherwise.
511 If ENDPOINT is ENDPOINT_LOCAL, it returns the address of the local
512 (client) side of the socket. Else if ENDPOINT is ENDPOINT_PEER, it
513 returns the address of the remote (peer's) side of the socket. */
516 socket_ip_address (int sock, ip_address *ip, int endpoint)
518 struct sockaddr_storage storage;
519 struct sockaddr *sockaddr = (struct sockaddr *)&storage;
520 socklen_t addrlen = sizeof (storage);
523 if (endpoint == ENDPOINT_LOCAL)
524 ret = getsockname (sock, sockaddr, &addrlen);
525 else if (endpoint == ENDPOINT_PEER)
526 ret = getpeername (sock, sockaddr, &addrlen);
532 switch (sockaddr->sa_family)
537 struct sockaddr_in6 *sa6 = (struct sockaddr_in6 *)&storage;
538 ip->type = IPV6_ADDRESS;
539 ADDRESS_IPV6_IN6_ADDR (ip) = sa6->sin6_addr;
540 #ifdef HAVE_SOCKADDR_IN6_SCOPE_ID
541 ADDRESS_IPV6_SCOPE (ip) = sa6->sin6_scope_id;
543 DEBUGP (("conaddr is: %s\n", pretty_print_address (ip)));
549 struct sockaddr_in *sa = (struct sockaddr_in *)&storage;
550 ip->type = IPV4_ADDRESS;
551 ADDRESS_IPV4_IN_ADDR (ip) = sa->sin_addr;
552 DEBUGP (("conaddr is: %s\n", pretty_print_address (ip)));
560 /* Return true if the error from the connect code can be considered
561 retryable. Wget normally retries after errors, but the exception
562 are the "unsupported protocol" type errors (possible on IPv4/IPv6
563 dual family systems) and "connection refused". */
566 retryable_socket_connect_error (int err)
568 /* Have to guard against some of these values not being defined.
569 Cannot use a switch statement because some of the values might be
573 || err == EAFNOSUPPORT
576 || err == EPFNOSUPPORT
578 #ifdef ESOCKTNOSUPPORT /* no, "sockt" is not a typo! */
579 || err == ESOCKTNOSUPPORT
581 #ifdef EPROTONOSUPPORT
582 || err == EPROTONOSUPPORT
585 || err == ENOPROTOOPT
587 /* Apparently, older versions of Linux and BSD used EINVAL
588 instead of EAFNOSUPPORT and such. */
593 if (!opt.retry_connrefused)
594 if (err == ECONNREFUSED
596 || err == ENETUNREACH /* network is unreachable */
599 || err == EHOSTUNREACH /* host is unreachable */
607 /* Wait for a single descriptor to become available, timing out after
608 MAXTIME seconds. Returns 1 if FD is available, 0 for timeout and
609 -1 for error. The argument WAIT_FOR can be a combination of
610 WAIT_FOR_READ and WAIT_FOR_WRITE.
612 This is a mere convenience wrapper around the select call, and
613 should be taken as such (for example, it doesn't implement Wget's
614 0-timeout-means-no-timeout semantics.) */
617 select_fd (int fd, double maxtime, int wait_for)
620 fd_set *rd = NULL, *wr = NULL;
621 struct timeval tmout;
626 if (wait_for & WAIT_FOR_READ)
628 if (wait_for & WAIT_FOR_WRITE)
631 tmout.tv_sec = (long) maxtime;
632 tmout.tv_usec = 1000000 * (maxtime - (long) maxtime);
635 result = select (fd + 1, rd, wr, NULL, &tmout);
636 while (result < 0 && errno == EINTR);
642 test_socket_open (int sock)
647 /* Check if we still have a valid (non-EOF) connection. From Andrew
648 * Maholski's code in the Unix Socket FAQ. */
650 FD_ZERO (&check_set);
651 FD_SET (sock, &check_set);
653 /* Wait one microsecond */
657 /* If we get a timeout, then that means still connected */
658 if (select (sock + 1, &check_set, NULL, NULL, &to) == 0)
660 /* Connection is valid (not EOF), so continue */
667 /* Basic socket operations, mostly EINTR wrappers. */
670 # define read(fd, buf, cnt) recv (fd, buf, cnt, 0)
671 # define write(fd, buf, cnt) send (fd, buf, cnt, 0)
672 # define close(fd) closesocket (fd)
676 # define read(fd, buf, cnt) recv (fd, buf, cnt, 0)
677 # define write(fd, buf, cnt) send (fd, buf, cnt, 0)
681 sock_read (int fd, char *buf, int bufsize)
685 res = read (fd, buf, bufsize);
686 while (res == -1 && errno == EINTR);
691 sock_write (int fd, char *buf, int bufsize)
695 res = write (fd, buf, bufsize);
696 while (res == -1 && errno == EINTR);
701 sock_poll (int fd, double timeout, int wait_for)
703 return select_fd (fd, timeout, wait_for);
707 sock_peek (int fd, char *buf, int bufsize)
711 res = recv (fd, buf, bufsize, MSG_PEEK);
712 while (res == -1 && errno == EINTR);
720 DEBUGP (("Closed fd %d\n", fd));
726 /* Reading and writing from the network. We build around the socket
727 (file descriptor) API, but support "extended" operations for things
728 that are not mere file descriptors under the hood, such as SSL
731 That way the user code can call fd_read(fd, ...) and we'll run read
732 or SSL_read or whatever is necessary. */
734 static struct hash_table *transport_map;
735 static int transport_map_modified_tick;
737 struct transport_info {
746 /* Register the transport layer operations that will be used when
747 reading, writing, and polling FD.
749 This should be used for transport layers like SSL that piggyback on
750 sockets. FD should otherwise be a real socket, on which you can
751 call getpeername, etc. */
754 fd_register_transport (int fd, fd_reader_t reader, fd_writer_t writer,
755 fd_poller_t poller, fd_peeker_t peeker,
756 fd_closer_t closer, void *ctx)
758 struct transport_info *info;
760 /* The file descriptor must be non-negative to be registered.
761 Negative values are ignored by fd_close(), and -1 cannot be used as
765 info = xnew (struct transport_info);
766 info->reader = reader;
767 info->writer = writer;
768 info->poller = poller;
769 info->peeker = peeker;
770 info->closer = closer;
773 transport_map = hash_table_new (0, NULL, NULL);
774 hash_table_put (transport_map, (void *) fd, info);
775 ++transport_map_modified_tick;
778 /* Return context of the transport registered with
779 fd_register_transport. This assumes fd_register_transport was
780 previously called on FD. */
783 fd_transport_context (int fd)
785 struct transport_info *info = hash_table_get (transport_map, (void *) fd);
789 /* When fd_read/fd_write are called multiple times in a loop, they should
790 remember the INFO pointer instead of fetching it every time. It is
791 not enough to compare FD to LAST_FD because FD might have been
792 closed and reopened. modified_tick ensures that changes to
793 transport_map will not be unnoticed.
795 This is a macro because we want the static storage variables to be
798 #define LAZY_RETRIEVE_INFO(info) do { \
799 static struct transport_info *last_info; \
800 static int last_fd = -1, last_tick; \
801 if (!transport_map) \
803 else if (last_fd == fd && last_tick == transport_map_modified_tick) \
807 info = hash_table_get (transport_map, (void *) fd); \
810 last_tick = transport_map_modified_tick; \
815 poll_internal (int fd, struct transport_info *info, int wf, double timeout)
818 timeout = opt.read_timeout;
822 if (info && info->poller)
823 test = info->poller (fd, timeout, wf, info->ctx);
825 test = sock_poll (fd, timeout, wf);
834 /* Read no more than BUFSIZE bytes of data from FD, storing them to
835 BUF. If TIMEOUT is non-zero, the operation aborts if no data is
836 received after that many seconds. If TIMEOUT is -1, the value of
837 opt.timeout is used for TIMEOUT. */
840 fd_read (int fd, char *buf, int bufsize, double timeout)
842 struct transport_info *info;
843 LAZY_RETRIEVE_INFO (info);
844 if (!poll_internal (fd, info, WAIT_FOR_READ, timeout))
846 if (info && info->reader)
847 return info->reader (fd, buf, bufsize, info->ctx);
849 return sock_read (fd, buf, bufsize);
852 /* Like fd_read, except it provides a "preview" of the data that will
853 be read by subsequent calls to fd_read. Specifically, it copies no
854 more than BUFSIZE bytes of the currently available data to BUF and
855 returns the number of bytes copied. Return values and timeout
856 semantics are the same as those of fd_read.
858 CAVEAT: Do not assume that the first subsequent call to fd_read
859 will retrieve the same amount of data. Reading can return more or
860 less data, depending on the TCP implementation and other
861 circumstances. However, barring an error, it can be expected that
862 all the peeked data will eventually be read by fd_read. */
865 fd_peek (int fd, char *buf, int bufsize, double timeout)
867 struct transport_info *info;
868 LAZY_RETRIEVE_INFO (info);
869 if (!poll_internal (fd, info, WAIT_FOR_READ, timeout))
871 if (info && info->peeker)
872 return info->peeker (fd, buf, bufsize, info->ctx);
874 return sock_peek (fd, buf, bufsize);
877 /* Write the entire contents of BUF to FD. If TIMEOUT is non-zero,
878 the operation aborts if no data is received after that many
879 seconds. If TIMEOUT is -1, the value of opt.timeout is used for
883 fd_write (int fd, char *buf, int bufsize, double timeout)
886 struct transport_info *info;
887 LAZY_RETRIEVE_INFO (info);
889 /* `write' may write less than LEN bytes, thus the loop keeps trying
890 it until all was written, or an error occurred. */
894 if (!poll_internal (fd, info, WAIT_FOR_WRITE, timeout))
896 if (info && info->writer)
897 res = info->writer (fd, buf, bufsize, info->ctx);
899 res = sock_write (fd, buf, bufsize);
908 /* Close the file descriptor FD. */
913 struct transport_info *info;
917 /* Don't use LAZY_RETRIEVE_INFO because fd_close() is only called once
918 per socket, so that particular optimization wouldn't work. */
921 info = hash_table_get (transport_map, (void *) fd);
923 if (info && info->closer)
924 info->closer (fd, info->ctx);
930 hash_table_remove (transport_map, (void *) fd);
932 ++transport_map_modified_tick;