From 2981313f3e26f10e981da7dfa85600bb79ae5a2f Mon Sep 17 00:00:00 2001
From: hniksic <devnull@localhost>
Date: Tue, 16 Sep 2003 18:53:28 -0700
Subject: [PATCH] [svn] Install latest mkinstalldirs and install-sh from
 Autoconf 2.57.

---
 ChangeLog     |   4 ++
 install-sh    | 130 ++++++++++++++++++++++++++++++--------------------
 mkinstalldirs | 111 ++++++++++++++++++++++++++++++++++--------
 3 files changed, 173 insertions(+), 72 deletions(-)

diff --git a/ChangeLog b/ChangeLog
index b6d10812..ce635d3b 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,7 @@
+2003-09-17  Hrvoje Niksic  <hniksic@xemacs.org>
+
+	* install-sh, mkinstalldirs: Updated from Autoconf 2.57.
+
 2003-09-17  Hrvoje Niksic  <hniksic@xemacs.org>
 
 	* ltmain.sh, aclocal.m4: Upgrade to libtool 1.4.3.  Libtool 1.5
diff --git a/install-sh b/install-sh
index ebc66913..36f96f3e 100755
--- a/install-sh
+++ b/install-sh
@@ -1,4 +1,4 @@
-#! /bin/sh
+#!/bin/sh
 #
 # install - install a program, script, or datafile
 # This comes from X11R5 (mit/util/scripts/install.sh).
@@ -56,7 +56,7 @@ dir_arg=""
 
 while [ x"$1" != x ]; do
     case $1 in
-	-c) instcmd="$cpprog"
+	-c) instcmd=$cpprog
 	    shift
 	    continue;;
 
@@ -79,7 +79,7 @@ while [ x"$1" != x ]; do
 	    shift
 	    continue;;
 
-	-s) stripcmd="$stripprog"
+	-s) stripcmd=$stripprog
 	    shift
 	    continue;;
 
@@ -106,127 +106,132 @@ done
 
 if [ x"$src" = x ]
 then
-	echo "install:	no input file specified"
+	echo "$0: no input file specified" >&2
 	exit 1
 else
-	true
+	:
 fi
 
 if [ x"$dir_arg" != x ]; then
 	dst=$src
 	src=""
-	
-	if [ -d $dst ]; then
+
+	if [ -d "$dst" ]; then
 		instcmd=:
+		chmodcmd=""
 	else
-		instcmd=mkdir
+		instcmd=$mkdirprog
 	fi
 else
 
 # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad 
+# might cause directories to be created, which would be especially bad
 # if $src (and thus $dsttmp) contains '*'.
 
-	if [ -f $src -o -d $src ]
+	if [ -f "$src" ] || [ -d "$src" ]
 	then
-		true
+		:
 	else
-		echo "install:  $src does not exist"
+		echo "$0: $src does not exist" >&2
 		exit 1
 	fi
-	
+
 	if [ x"$dst" = x ]
 	then
-		echo "install:	no destination specified"
+		echo "$0: no destination specified" >&2
 		exit 1
 	else
-		true
+		:
 	fi
 
 # If destination is a directory, append the input filename; if your system
 # does not like double slashes in filenames, you may need to add some logic
 
-	if [ -d $dst ]
+	if [ -d "$dst" ]
 	then
-		dst="$dst"/`basename $src`
+		dst=$dst/`basename "$src"`
 	else
-		true
+		:
 	fi
 fi
 
 ## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
 
 # Make sure that the destination directory exists.
 #  this part is taken from Noah Friedman's mkinstalldirs script
 
 # Skip lots of stat calls in the usual case.
 if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
+defaultIFS='
+	'
+IFS="${IFS-$defaultIFS}"
 
-oIFS="${IFS}"
+oIFS=$IFS
 # Some sh's can't handle IFS=/ for some reason.
 IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS=$oIFS
 
 pathcomp=''
 
 while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
+	pathcomp=$pathcomp$1
 	shift
 
-	if [ ! -d "${pathcomp}" ] ;
+	if [ ! -d "$pathcomp" ] ;
         then
-		$mkdirprog "${pathcomp}"
+		$mkdirprog "$pathcomp"
 	else
-		true
+		:
 	fi
 
-	pathcomp="${pathcomp}/"
+	pathcomp=$pathcomp/
 done
 fi
 
 if [ x"$dir_arg" != x ]
 then
-	$doit $instcmd $dst &&
+	$doit $instcmd "$dst" &&
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
 else
 
 # If we're going to rename the final executable, determine the name now.
 
-	if [ x"$transformarg" = x ] 
+	if [ x"$transformarg" = x ]
 	then
-		dstfile=`basename $dst`
+		dstfile=`basename "$dst"`
 	else
-		dstfile=`basename $dst $transformbasename | 
+		dstfile=`basename "$dst" $transformbasename |
 			sed $transformarg`$transformbasename
 	fi
 
 # don't allow the sed command to completely eliminate the filename
 
-	if [ x"$dstfile" = x ] 
+	if [ x"$dstfile" = x ]
 	then
-		dstfile=`basename $dst`
+		dstfile=`basename "$dst"`
 	else
-		true
+		:
 	fi
 
-# Make a temp file name in the proper directory.
+# Make a couple of temp file names in the proper directory.
 
 	dsttmp=$dstdir/#inst.$$#
+	rmtmp=$dstdir/#rm.$$#
 
-# Move or copy the file name to the temp name
+# Trap to clean up temp files at exit.
 
-	$doit $instcmd $src $dsttmp &&
+	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+	trap '(exit $?); exit' 1 2 13 15
 
-	trap "rm -f ${dsttmp}" 0 &&
+# Move or copy the file name to the temp name
+
+	$doit $instcmd "$src" "$dsttmp" &&
 
 # and set any options; do chmod last to preserve setuid bits
 
@@ -234,17 +239,38 @@ else
 # ignore errors from any of these, just make sure not to ignore
 # errors from the above "$doit $instcmd $src $dsttmp" command.
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+
+# Now remove or move aside any old file at destination location.  We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons.  In this case, the final cleanup
+# might fail but the new file should still install successfully.
+
+{
+	if [ -f "$dstdir/$dstfile" ]
+	then
+		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+		{
+		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		  (exit 1); exit
+		}
+	else
+		:
+	fi
+} &&
 
 # Now rename the file to the real destination.
 
-	$doit $rmcmd -f $dstdir/$dstfile &&
-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
 
 fi &&
 
+# The final little trick to "correctly" pass the exit status to the exit trap.
 
-exit 0
+{
+	(exit 0); exit
+}
diff --git a/mkinstalldirs b/mkinstalldirs
index e95a2ad7..d2d5f21b 100755
--- a/mkinstalldirs
+++ b/mkinstalldirs
@@ -4,37 +4,108 @@
 # Created: 1993-05-16
 # Public domain
 
-# $Id: mkinstalldirs 2 1999-12-02 07:42:23Z kwget $
-
 errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+  case $1 in
+    -h | --help | --h*)         # -h for help
+      echo "$usage" 1>&2
+      exit 0
+      ;;
+    -m)                         # -m PERM arg
+      shift
+      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+      dirmode=$1
+      shift
+      ;;
+    --)                         # stop option processing
+      shift
+      break
+      ;;
+    -*)                         # unknown option
+      echo "$usage" 1>&2
+      exit 1
+      ;;
+    *)                          # first non-opt arg
+      break
+      ;;
+  esac
+done
 
 for file
 do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+  0) exit 0 ;;
+esac
+
+case $dirmode in
+  '')
+    if mkdir -p -- . 2>/dev/null; then
+      echo "mkdir -p -- $*"
+      exec mkdir -p -- "$@"
+    fi
+    ;;
+  *)
+    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+      echo "mkdir -m $dirmode -p -- $*"
+      exec mkdir -m "$dirmode" -p -- "$@"
+    fi
+    ;;
+esac
+
+for file
+do
+  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+  shift
+
+  pathcomp=
+  for d
+  do
+    pathcomp="$pathcomp$d"
+    case $pathcomp in
+      -*) pathcomp=./$pathcomp ;;
+    esac
 
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
+    if test ! -d "$pathcomp"; then
+      echo "mkdir $pathcomp"
 
-     if test ! -d "$pathcomp"; then
-        echo "mkdir $pathcomp" 1>&2
+      mkdir "$pathcomp" || lasterr=$?
 
-        mkdir "$pathcomp" || lasterr=$?
+      if test ! -d "$pathcomp"; then
+  	errstatus=$lasterr
+      else
+  	if test ! -z "$dirmode"; then
+	  echo "chmod $dirmode $pathcomp"
+    	  lasterr=""
+  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
 
-        if test ! -d "$pathcomp"; then
-  	  errstatus=$lasterr
-        fi
-     fi
+  	  if test ! -z "$lasterr"; then
+  	    errstatus=$lasterr
+  	  fi
+  	fi
+      fi
+    fi
 
-     pathcomp="$pathcomp/"
-   done
+    pathcomp="$pathcomp/"
+  done
 done
 
 exit $errstatus
 
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# End:
 # mkinstalldirs ends here
-- 
2.39.2