/* URL handling.
- Copyright (C) 1995, 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
+ Copyright (C) 1995, 1996, 1997, 2000, 2001, 2003, 2003
+ Free Software Foundation, Inc.
This file is part of GNU Wget.
You should have received a copy of the GNU General Public License
along with Wget; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+In addition, as a special exception, the Free Software Foundation
+gives permission to link the code of its release of Wget with the
+OpenSSL project's "OpenSSL" library (or with modified versions of it
+that use the same license as the "OpenSSL" library), and distribute
+the linked executables. You must obey the GNU General Public License
+in all respects for all of the code used other than "OpenSSL". If you
+modify this file, you may extend this exception to your version of the
+file, but you are not obligated to do so. If you do not wish to do
+so, delete this exception statement from your version. */
#include <config.h>
/* Is X ".."? */
#define DDOTP(x) ((*(x) == '.') && (*(x + 1) == '.') && (!*(x + 2)))
-static int urlpath_length PARAMS ((const char *));
+static const int NS_INADDRSZ = 4;
+static const int NS_IN6ADDRSZ = 16;
+static const int NS_INT16SZ = 2;
+
struct scheme_data
{
char *leading_string;
int default_port;
+ int enabled;
};
/* Supported schemes: */
static struct scheme_data supported_schemes[] =
{
- { "http://", DEFAULT_HTTP_PORT },
+ { "http://", DEFAULT_HTTP_PORT, 1 },
#ifdef HAVE_SSL
- { "https://", DEFAULT_HTTPS_PORT },
+ { "https://", DEFAULT_HTTPS_PORT, 1 },
#endif
- { "ftp://", DEFAULT_FTP_PORT },
+ { "ftp://", DEFAULT_FTP_PORT, 1 },
/* SCHEME_INVALID */
- { NULL, -1 }
+ { NULL, -1, 0 }
};
+/* Forward declarations: */
+
static char *construct_relative PARAMS ((const char *, const char *));
+static int path_simplify PARAMS ((char *));
+
\f
/* Support for encoding and decoding of URL strings. We determine
code assumes ASCII character set and 8-bit chars. */
enum {
+ /* rfc1738 reserved chars, preserved from encoding. */
urlchr_reserved = 1,
+
+ /* rfc1738 unsafe chars, plus some more. */
urlchr_unsafe = 2
};
+#define urlchr_test(c, mask) (urlchr_table[(unsigned char)(c)] & (mask))
+#define URL_RESERVED_CHAR(c) urlchr_test(c, urlchr_reserved)
+#define URL_UNSAFE_CHAR(c) urlchr_test(c, urlchr_unsafe)
+
+/* Shorthands for the table: */
#define R urlchr_reserved
#define U urlchr_unsafe
#define RU R|U
-#define urlchr_test(c, mask) (urlchr_table[(unsigned char)(c)] & (mask))
-
-/* rfc1738 reserved chars, preserved from encoding. */
-
-#define RESERVED_CHAR(c) urlchr_test(c, urlchr_reserved)
-
-/* rfc1738 unsafe chars, plus some more. */
-
-#define UNSAFE_CHAR(c) urlchr_test(c, urlchr_unsafe)
-
const static unsigned char urlchr_table[256] =
{
U, U, U, U, U, U, U, U, /* NUL SOH STX ETX EOT ENQ ACK BEL */
RU, 0, 0, 0, 0, 0, 0, 0, /* @ A B C D E F G */
0, 0, 0, 0, 0, 0, 0, 0, /* H I J K L M N O */
0, 0, 0, 0, 0, 0, 0, 0, /* P Q R S T U V W */
- 0, 0, 0, U, U, U, U, 0, /* X Y Z [ \ ] ^ _ */
+ 0, 0, 0, RU, U, RU, U, 0, /* X Y Z [ \ ] ^ _ */
U, 0, 0, 0, 0, 0, 0, 0, /* ` a b c d e f g */
0, 0, 0, 0, 0, 0, 0, 0, /* h i j k l m n o */
0, 0, 0, 0, 0, 0, 0, 0, /* p q r s t u v w */
U, U, U, U, U, U, U, U, U, U, U, U, U, U, U, U,
U, U, U, U, U, U, U, U, U, U, U, U, U, U, U, U,
};
+#undef R
+#undef U
+#undef RU
-/* Decodes the forms %xy in a URL to the character the hexadecimal
- code of which is xy. xy are hexadecimal digits from
- [0123456789ABCDEF] (case-insensitive). If x or y are not
- hex-digits or `%' precedes `\0', the sequence is inserted
- literally. */
+/* URL-unescape the string S.
+
+ This is done by transforming the sequences "%HH" to the character
+ represented by the hexadecimal digits HH. If % is not followed by
+ two hexadecimal digits, it is inserted literally.
+
+ The transformation is done in place. If you need the original
+ string intact, make a copy before calling this function. */
static void
-decode_string (char *s)
+url_unescape (char *s)
{
char *t = s; /* t - tortoise */
char *h = s; /* h - hare */
*t = '\0';
}
-/* Like encode_string, but return S if there are no unsafe chars. */
+/* The core of url_escape_* functions. Escapes the characters that
+ match the provided mask in urlchr_table.
+
+ If ALLOW_PASSTHROUGH is non-zero, a string with no unsafe chars
+ will be returned unchanged. If ALLOW_PASSTHROUGH is zero, a
+ freshly allocated string will be returned in all cases. */
static char *
-encode_string_maybe (const char *s)
+url_escape_1 (const char *s, unsigned char mask, int allow_passthrough)
{
const char *p1;
char *p2, *newstr;
int addition = 0;
for (p1 = s; *p1; p1++)
- if (UNSAFE_CHAR (*p1))
+ if (urlchr_test (*p1, mask))
addition += 2; /* Two more characters (hex digits) */
if (!addition)
- return (char *)s;
+ return allow_passthrough ? (char *)s : xstrdup (s);
newlen = (p1 - s) + addition;
newstr = (char *)xmalloc (newlen + 1);
p2 = newstr;
while (*p1)
{
- if (UNSAFE_CHAR (*p1))
+ /* Quote the characters that match the test mask. */
+ if (urlchr_test (*p1, mask))
{
unsigned char c = *p1++;
*p2++ = '%';
else
*p2++ = *p1++;
}
- *p2 = '\0';
assert (p2 - newstr == newlen);
+ *p2 = '\0';
return newstr;
}
-/* Encode the unsafe characters (as determined by UNSAFE_CHAR) in a
- given string, returning a malloc-ed %XX encoded string. */
-
+/* URL-escape the unsafe characters (see urlchr_table) in a given
+ string, returning a freshly allocated string. */
+
char *
-encode_string (const char *s)
+url_escape (const char *s)
{
- char *encoded = encode_string_maybe (s);
- if (encoded != s)
- return encoded;
- else
- return xstrdup (s);
+ return url_escape_1 (s, urlchr_unsafe, 0);
}
-/* Encode unsafe characters in PTR to %xx. If such encoding is done,
- the old value of PTR is freed and PTR is made to point to the newly
- allocated storage. */
-
-#define ENCODE(ptr) do { \
- char *e_new = encode_string_maybe (ptr); \
- if (e_new != ptr) \
- { \
- xfree (ptr); \
- ptr = e_new; \
- } \
-} while (0)
+/* URL-escape the unsafe characters (see urlchr_table) in a given
+ string. If no characters are unsafe, S is returned. */
+
+static char *
+url_escape_allow_passthrough (const char *s)
+{
+ return url_escape_1 (s, urlchr_unsafe, 1);
+}
\f
enum copy_method { CM_DECODE, CM_ENCODE, CM_PASSTHROUGH };
char preempt = (XCHAR_TO_XDIGIT (*(p + 1)) << 4) +
XCHAR_TO_XDIGIT (*(p + 2));
- if (UNSAFE_CHAR (preempt) || RESERVED_CHAR (preempt))
+ if (URL_UNSAFE_CHAR (preempt) || URL_RESERVED_CHAR (preempt))
return CM_PASSTHROUGH;
else
return CM_DECODE;
/* Garbled %.. sequence: encode `%'. */
return CM_ENCODE;
}
- else if (UNSAFE_CHAR (*p) && !RESERVED_CHAR (*p))
+ else if (URL_UNSAFE_CHAR (*p) && !URL_RESERVED_CHAR (*p))
return CM_ENCODE;
else
return CM_PASSTHROUGH;
}
-/* Translate a %-quoting (but possibly non-conformant) input string S
- into a %-quoting (and conformant) output string. If no characters
+/* Translate a %-escaped (but possibly non-conformant) input string S
+ into a %-escaped (and conformant) output string. If no characters
are encoded or decoded, return the same string S; otherwise, return
a freshly allocated string with the new contents.
After a URL has been run through this function, the protocols that
use `%' as the quote character can use the resulting string as-is,
- while those that don't call decode_string() to get to the intended
+ while those that don't call url_unescape() to get to the intended
data. This function is also stable: after an input string is
transformed the first time, all further transformations of the
result yield the same result string.
GET /abc%20def HTTP/1.0
- So it appears that the unsafe chars need to be quoted, as with
- encode_string. But what if we're requested to download
- `abc%20def'? Remember that %-encoding is valid URL syntax, so what
- the user meant was a literal space, and he was kind enough to quote
- it. In that case, Wget should obviously leave the `%20' as is, and
- send the same request as above. So in this case we may not call
- encode_string.
-
- But what if the requested URI is `abc%20 def'? If we call
- encode_string, we end up with `/abc%2520%20def', which is almost
- certainly not intended. If we don't call encode_string, we are
- left with the embedded space and cannot send the request. What the
+ It appears that the unsafe chars need to be quoted, for example
+ with url_escape. But what if we're requested to download
+ `abc%20def'? url_escape transforms "%" to "%25", which would leave
+ us with `abc%2520def'. This is incorrect -- since %-escapes are
+ part of URL syntax, "%20" is the correct way to denote a literal
+ space on the Wget command line. This leaves us in the conclusion
+ that in that case Wget should not call url_escape, but leave the
+ `%20' as is.
+
+ And what if the requested URI is `abc%20 def'? If we call
+ url_escape, we end up with `/abc%2520%20def', which is almost
+ certainly not intended. If we don't call url_escape, we are left
+ with the embedded space and cannot complete the request. What the
user meant was for Wget to request `/abc%20%20def', and this is
- where reencode_string kicks in.
+ where reencode_escapes kicks in.
Wget used to solve this by first decoding %-quotes, and then
encoding all the "unsafe" characters found in the resulting string.
is inevitable because by the second step we would lose information
on whether the `+' was originally encoded or not. Both results
were wrong because in CGI parameters + means space, while %2B means
- literal plus. reencode_string correctly translates the above to
+ literal plus. reencode_escapes correctly translates the above to
"a%2B+b", i.e. returns the original string.
This function uses an algorithm proposed by Anon Sricharoenchai:
"foo+bar" -> "foo+bar" (plus is reserved!)
"foo%2b+bar" -> "foo%2b+bar" */
-char *
-reencode_string (const char *s)
+static char *
+reencode_escapes (const char *s)
{
const char *p1;
char *newstr, *p2;
assert (p2 - newstr == newlen);
return newstr;
}
-
-/* Run PTR_VAR through reencode_string. If a new string is consed,
- free PTR_VAR and make it point to the new storage. Obviously,
- PTR_VAR needs to be an lvalue. */
-
-#define REENCODE(ptr_var) do { \
- char *rf_new = reencode_string (ptr_var); \
- if (rf_new != ptr_var) \
- { \
- xfree (ptr_var); \
- ptr_var = rf_new; \
- } \
-} while (0)
\f
/* Returns the scheme type if the scheme is supported, or
SCHEME_INVALID if not. */
int i;
for (i = 0; supported_schemes[i].leading_string; i++)
- if (!strncasecmp (url, supported_schemes[i].leading_string,
- strlen (supported_schemes[i].leading_string)))
- return (enum url_scheme)i;
+ if (0 == strncasecmp (url, supported_schemes[i].leading_string,
+ strlen (supported_schemes[i].leading_string)))
+ {
+ if (supported_schemes[i].enabled)
+ return (enum url_scheme) i;
+ else
+ return SCHEME_INVALID;
+ }
+
return SCHEME_INVALID;
}
return supported_schemes[scheme].default_port;
}
+void
+scheme_disable (enum url_scheme scheme)
+{
+ supported_schemes[scheme].enabled = 0;
+}
+
/* Skip the username and password, if present here. The function
should be called *not* with the complete URL, but with the part
right after the scheme.
memcpy (*user, str, len);
(*user)[len] = '\0';
+ if (*user)
+ url_unescape (*user);
+ if (*passwd)
+ url_unescape (*passwd);
+
return 1;
}
if (*p == ':')
{
- const char *pp, *path;
+ const char *pp;
char *res;
/* If the characters after the colon and before the next slash
or end of string are all digits, it's HTTP. */
int digits = 0;
for (pp = p + 1; ISDIGIT (*pp); pp++)
++digits;
- if (digits > 0
- && (*pp == '/' || *pp == '\0'))
+ if (digits > 0 && (*pp == '/' || *pp == '\0'))
goto http;
/* Prepend "ftp://" to the entire URL... */
- path = p + 1;
res = xmalloc (6 + strlen (url) + 1);
sprintf (res, "ftp://%s", url);
/* ...and replace ':' with '/'. */
\f
static void parse_path PARAMS ((const char *, char **, char **));
+/* Like strpbrk, with the exception that it returns the pointer to the
+ terminating zero (end-of-string aka "eos") if no matching character
+ is found.
+
+ Although I normally balk at Gcc-specific optimizations, it probably
+ makes sense here: glibc has optimizations that detect strpbrk being
+ called with literal string as ACCEPT and inline the search. That
+ optimization is defeated if strpbrk is hidden within the call to
+ another function. (And no, making strpbrk_or_eos inline doesn't
+ help because the check for literal accept is in the
+ preprocessor.) */
+
+#ifdef __GNUC__
+
+#define strpbrk_or_eos(s, accept) ({ \
+ char *SOE_p = strpbrk (s, accept); \
+ if (!SOE_p) \
+ SOE_p = (char *)s + strlen (s); \
+ SOE_p; \
+})
+
+#else /* not __GNUC__ */
+
static char *
strpbrk_or_eos (const char *s, const char *accept)
{
p = (char *)s + strlen (s);
return p;
}
+#endif
/* Turn STR into lowercase; return non-zero if a character was
actually changed. */
{
int change = 0;
for (; *str; str++)
- if (!ISLOWER (*str))
+ if (ISUPPER (*str))
{
change = 1;
*str = TOLOWER (*str);
}
static char *parse_errors[] = {
-#define PE_NO_ERROR 0
+#define PE_NO_ERROR 0
"No error",
-#define PE_UNRECOGNIZED_SCHEME 1
- "Unrecognized scheme",
-#define PE_EMPTY_HOST 2
+#define PE_UNSUPPORTED_SCHEME 1
+ "Unsupported scheme",
+#define PE_EMPTY_HOST 2
"Empty host",
-#define PE_BAD_PORT_NUMBER 3
+#define PE_BAD_PORT_NUMBER 3
"Bad port number",
-#define PE_INVALID_USER_NAME 4
- "Invalid user name"
+#define PE_INVALID_USER_NAME 4
+ "Invalid user name",
+#define PE_UNTERMINATED_IPV6_ADDRESS 5
+ "Unterminated IPv6 numeric address",
+#define PE_IPV6_NOT_SUPPORTED 6
+ "IPv6 addresses not supported",
+#define PE_INVALID_IPV6_ADDRESS 7
+ "Invalid IPv6 numeric address"
};
#define SETERR(p, v) do { \
*(p) = (v); \
} while (0)
+#ifdef ENABLE_IPV6
+/* The following two functions were adapted from glibc. */
+
+static int
+is_valid_ipv4_address (const char *str, const char *end)
+{
+ int saw_digit, octets;
+ int val;
+
+ saw_digit = 0;
+ octets = 0;
+ val = 0;
+
+ while (str < end) {
+ int ch = *str++;
+
+ if (ch >= '0' && ch <= '9') {
+ val = val * 10 + (ch - '0');
+
+ if (val > 255)
+ return 0;
+ if (saw_digit == 0) {
+ if (++octets > 4)
+ return 0;
+ saw_digit = 1;
+ }
+ } else if (ch == '.' && saw_digit == 1) {
+ if (octets == 4)
+ return 0;
+ val = 0;
+ saw_digit = 0;
+ } else
+ return 0;
+ }
+ if (octets < 4)
+ return 0;
+
+ return 1;
+}
+
+static int
+is_valid_ipv6_address (const char *str, const char *end)
+{
+ static const char xdigits[] = "0123456789abcdef";
+ const char *curtok;
+ int tp;
+ const char *colonp;
+ int saw_xdigit;
+ unsigned int val;
+
+ tp = 0;
+ colonp = NULL;
+
+ if (str == end)
+ return 0;
+
+ /* Leading :: requires some special handling. */
+ if (*str == ':')
+ {
+ ++str;
+ if (str == end || *str != ':')
+ return 0;
+ }
+
+ curtok = str;
+ saw_xdigit = 0;
+ val = 0;
+
+ while (str < end) {
+ int ch = *str++;
+ const char *pch;
+
+ /* if ch is a number, add it to val. */
+ pch = strchr(xdigits, ch);
+ if (pch != NULL) {
+ val <<= 4;
+ val |= (pch - xdigits);
+ if (val > 0xffff)
+ return 0;
+ saw_xdigit = 1;
+ continue;
+ }
+
+ /* if ch is a colon ... */
+ if (ch == ':') {
+ curtok = str;
+ if (saw_xdigit == 0) {
+ if (colonp != NULL)
+ return 0;
+ colonp = str + tp;
+ continue;
+ } else if (str == end) {
+ return 0;
+ }
+ if (tp > NS_IN6ADDRSZ - NS_INT16SZ)
+ return 0;
+ tp += NS_INT16SZ;
+ saw_xdigit = 0;
+ val = 0;
+ continue;
+ }
+
+ /* if ch is a dot ... */
+ if (ch == '.' && (tp <= NS_IN6ADDRSZ - NS_INADDRSZ) &&
+ is_valid_ipv4_address(curtok, end) == 1) {
+ tp += NS_INADDRSZ;
+ saw_xdigit = 0;
+ break;
+ }
+
+ return 0;
+ }
+
+ if (saw_xdigit == 1) {
+ if (tp > NS_IN6ADDRSZ - NS_INT16SZ)
+ return 0;
+ tp += NS_INT16SZ;
+ }
+
+ if (colonp != NULL) {
+ if (tp == NS_IN6ADDRSZ)
+ return 0;
+ tp = NS_IN6ADDRSZ;
+ }
+
+ if (tp != NS_IN6ADDRSZ)
+ return 0;
+
+ return 1;
+}
+#endif
+
/* Parse a URL.
Return a new struct url if successful, NULL on error. In case of
scheme = url_scheme (url);
if (scheme == SCHEME_INVALID)
{
- SETERR (error, PE_UNRECOGNIZED_SCHEME);
+ SETERR (error, PE_UNSUPPORTED_SCHEME);
return NULL;
}
- url_encoded = reencode_string (url);
+ url_encoded = reencode_escapes (url);
p = url_encoded;
p += strlen (supported_schemes[scheme].leading_string);
fragment_b = fragment_e = NULL;
host_b = p;
- p = strpbrk_or_eos (p, ":/;?#");
- host_e = p;
+
+ if (*p == '[')
+ {
+ /* Handle IPv6 address inside square brackets. Ideally we'd
+ just look for the terminating ']', but rfc2732 mandates
+ rejecting invalid IPv6 addresses. */
+
+ /* The address begins after '['. */
+ host_b = p + 1;
+ host_e = strchr (host_b, ']');
+
+ if (!host_e)
+ {
+ SETERR (error, PE_UNTERMINATED_IPV6_ADDRESS);
+ return NULL;
+ }
+
+#ifdef ENABLE_IPV6
+ /* Check if the IPv6 address is valid. */
+ if (!is_valid_ipv6_address(host_b, host_e))
+ {
+ SETERR (error, PE_INVALID_IPV6_ADDRESS);
+ return NULL;
+ }
+
+ /* Continue parsing after the closing ']'. */
+ p = host_e + 1;
+#else
+ SETERR (error, PE_IPV6_NOT_SUPPORTED);
+ return NULL;
+#endif
+ }
+ else
+ {
+ p = strpbrk_or_eos (p, ":/;?#");
+ host_e = p;
+ }
if (host_b == host_e)
{
SETERR (error, PE_BAD_PORT_NUMBER);
return NULL;
}
+
port = 10 * port + (*pp - '0');
}
}
query_b = p;
p = strpbrk_or_eos (p, "#");
query_e = p;
+
+ /* Hack that allows users to use '?' (a wildcard character) in
+ FTP URLs without it being interpreted as a query string
+ delimiter. */
+ if (scheme == SCHEME_FTP)
+ {
+ query_b = query_e = NULL;
+ path_e = p;
+ }
}
if (*p == '#')
{
if (fragment_b)
u->fragment = strdupdelim (fragment_b, fragment_e);
-
- if (path_modified || u->fragment || host_modified)
+ if (path_modified || u->fragment || host_modified || path_b == path_e)
{
- /* If path_simplify modified the path, or if a fragment is
- present, or if the original host name had caps in it, make
- sure that u->url is equivalent to what would be printed by
- url_string. */
+ /* If we suspect that a transformation has rendered what
+ url_string might return different from URL_ENCODED, rebuild
+ u->url using url_string. */
u->url = url_string (u, 0);
if (url_encoded != url)
else
{
if (url_encoded == url)
- u->url = xstrdup (url);
+ u->url = xstrdup (url);
else
- u->url = url_encoded;
+ u->url = url_encoded;
}
url_encoded = NULL;
return parse_errors[error_code];
}
+/* Parse PATH into dir and file. PATH is extracted from the URL and
+ is URL-escaped. The function returns unescaped DIR and FILE. */
+
static void
-parse_path (const char *quoted_path, char **dir, char **file)
+parse_path (const char *path, char **dir, char **file)
{
- char *path, *last_slash;
-
- STRDUP_ALLOCA (path, quoted_path);
- decode_string (path);
+ char *last_slash;
last_slash = strrchr (path, '/');
if (!last_slash)
*dir = strdupdelim (path, last_slash);
*file = xstrdup (last_slash + 1);
}
+ url_unescape (*dir);
+ url_unescape (*file);
}
/* Note: URL's "full path" is the path with the query string and
#undef FROB
}
-/* Public function for getting the "full path". */
+/* Public function for getting the "full path". E.g. if u->path is
+ "foo/bar" and u->query is "param=value", full_path will be
+ "/foo/bar?param=value". */
+
char *
url_full_path (const struct url *url)
{
return full_path;
}
-/* Sync u->path and u->url with u->dir and u->file. */
-static void
-sync_path (struct url *url)
+/* Escape unsafe and reserved characters, except for the slash
+ characters. */
+
+static char *
+url_escape_dir (const char *dir)
{
- char *newpath;
+ char *newdir = url_escape_1 (dir, urlchr_unsafe | urlchr_reserved, 1);
+ char *h, *t;
+ if (newdir == dir)
+ return (char *)dir;
- xfree (url->path);
+ /* Unescape slashes in NEWDIR. */
- if (!*url->dir)
+ h = newdir; /* hare */
+ t = newdir; /* tortoise */
+
+ for (; *h; h++, t++)
{
- newpath = xstrdup (url->file);
- REENCODE (newpath);
+ if (*h == '%' && h[1] == '2' && h[2] == 'F')
+ {
+ *t = '/';
+ h += 2;
+ }
+ else
+ *t = *h;
}
+ *t = '\0';
+
+ return newdir;
+}
+
+/* Sync u->path and u->url with u->dir and u->file. Called after
+ u->file or u->dir have been changed, typically by the FTP code. */
+
+static void
+sync_path (struct url *u)
+{
+ char *newpath, *efile, *edir;
+
+ xfree (u->path);
+
+ /* u->dir and u->file are not escaped. URL-escape them before
+ reassembling them into u->path. That way, if they contain
+ separators like '?' or even if u->file contains slashes, the
+ path will be correctly assembled. (u->file can contain slashes
+ if the URL specifies it with %2f, or if an FTP server returns
+ it.) */
+ edir = url_escape_dir (u->dir);
+ efile = url_escape_1 (u->file, urlchr_unsafe | urlchr_reserved, 1);
+
+ if (!*edir)
+ newpath = xstrdup (efile);
else
{
- int dirlen = strlen (url->dir);
- int filelen = strlen (url->file);
-
- newpath = xmalloc (dirlen + 1 + filelen + 1);
- memcpy (newpath, url->dir, dirlen);
- newpath[dirlen] = '/';
- memcpy (newpath + dirlen + 1, url->file, filelen);
- newpath[dirlen + 1 + filelen] = '\0';
- REENCODE (newpath);
+ int dirlen = strlen (edir);
+ int filelen = strlen (efile);
+
+ /* Copy "DIR/FILE" to newpath. */
+ char *p = newpath = xmalloc (dirlen + 1 + filelen + 1);
+ memcpy (p, edir, dirlen);
+ p += dirlen;
+ *p++ = '/';
+ memcpy (p, efile, filelen);
+ p += filelen;
+ *p++ = '\0';
}
- url->path = newpath;
+ u->path = newpath;
- /* Synchronize u->url. */
- xfree (url->url);
- url->url = url_string (url, 0);
+ if (edir != u->dir)
+ xfree (edir);
+ if (efile != u->file)
+ xfree (efile);
+
+ /* Regenerate u->url as well. */
+ xfree (u->url);
+ u->url = url_string (u, 0);
}
/* Mutators. Code in ftp.c insists on changing u->dir and u->file.
return NULL;
}
DEBUGP (("Loaded %s (size %ld).\n", file, fm->length));
+
head = tail = NULL;
text = fm->content;
text_end = fm->content + fm->length;
else
++line_end;
text = line_end;
- while (line_beg < line_end
- && ISSPACE (*line_beg))
+
+ /* Strip whitespace from the beginning and end of line. */
+ while (line_beg < line_end && ISSPACE (*line_beg))
++line_beg;
- while (line_end > line_beg + 1
- && ISSPACE (*(line_end - 1)))
+ while (line_end > line_beg && ISSPACE (*(line_end - 1)))
--line_end;
+
if (line_end > line_beg)
{
+ /* URL is in the [line_beg, line_end) region. */
+
int up_error_code;
char *url_text;
struct urlpos *entry;
struct url *url;
- /* We must copy the URL to a zero-terminated string. *sigh*. */
+ /* We must copy the URL to a zero-terminated string, and we
+ can't use alloca because we're in a loop. *sigh*. */
url_text = strdupdelim (line_beg, line_end);
+
+ if (opt.base_href)
+ {
+ /* Merge opt.base_href with URL. */
+ char *merged = uri_merge (opt.base_href, url_text);
+ xfree (url_text);
+ url_text = merged;
+ }
+
url = url_parse (url_text, &up_error_code);
if (!url)
{
{
sprintf (from, "%s.%d", fname, i - 1);
sprintf (to, "%s.%d", fname, i);
- /* #### This will fail on machines without the rename() system
- call. */
rename (from, to);
}
int res;
p = path + strlen (path);
- for (; *p != '/' && p != path; p--);
+ for (; *p != '/' && p != path; p--)
+ ;
+
/* Don't create if it's just a file. */
if ((p == path) && (*p != '/'))
return 0;
t = strdupdelim (path, p);
+
/* Check whether the directory exists. */
if ((stat (t, &st) == 0))
{
xfree (t);
return res;
}
+\f
+/* Functions for constructing the file name out of URL components. */
-static int
-count_slashes (const char *s)
+/* A growable string structure, used by url_file_name and friends.
+ This should perhaps be moved to utils.c.
+
+ The idea is to have a convenient and efficient way to construct a
+ string by having various functions append data to it. Instead of
+ passing the obligatory BASEVAR, SIZEVAR and TAILPOS to all the
+ functions in questions, we pass the pointer to this struct. */
+
+struct growable {
+ char *base;
+ int size;
+ int tail;
+};
+
+/* Ensure that the string can accept APPEND_COUNT more characters past
+ the current TAIL position. If necessary, this will grow the string
+ and update its allocated size. If the string is already large
+ enough to take TAIL+APPEND_COUNT characters, this does nothing. */
+#define GROW(g, append_size) do { \
+ struct growable *G_ = g; \
+ DO_REALLOC (G_->base, G_->size, G_->tail + append_size, char); \
+} while (0)
+
+/* Return the tail position of the string. */
+#define TAIL(r) ((r)->base + (r)->tail)
+
+/* Move the tail position by APPEND_COUNT characters. */
+#define TAIL_INCR(r, append_count) ((r)->tail += append_count)
+
+/* Append the string STR to DEST. NOTICE: the string in DEST is not
+ terminated. */
+
+static void
+append_string (const char *str, struct growable *dest)
{
- int i = 0;
- while (*s)
- if (*s++ == '/')
- ++i;
- return i;
+ int l = strlen (str);
+ GROW (dest, l);
+ memcpy (TAIL (dest), str, l);
+ TAIL_INCR (dest, l);
}
-/* Return the path name of the URL-equivalent file name, with a
- remote-like structure of directories. */
-static char *
-mkstruct (const struct url *u)
+/* Append CH to DEST. For example, append_char (0, DEST)
+ zero-terminates DEST. */
+
+static void
+append_char (char ch, struct growable *dest)
{
- char *dir, *dir_preencoding;
- char *file, *res, *dirpref;
- char *query = u->query && *u->query ? u->query : NULL;
- int l;
+ GROW (dest, 1);
+ *TAIL (dest) = ch;
+ TAIL_INCR (dest, 1);
+}
- if (opt.cut_dirs)
- {
- char *ptr = u->dir + (*u->dir == '/');
- int slash_count = 1 + count_slashes (ptr);
- int cut = MINVAL (opt.cut_dirs, slash_count);
- for (; cut && *ptr; ptr++)
- if (*ptr == '/')
- --cut;
- STRDUP_ALLOCA (dir, ptr);
- }
- else
- dir = u->dir + (*u->dir == '/');
+enum {
+ filechr_not_unix = 1, /* unusable on Unix, / and \0 */
+ filechr_not_windows = 2, /* unusable on Windows, one of \|/<>?:*" */
+ filechr_control = 4, /* a control character, e.g. 0-31 */
+};
- /* Check for the true name (or at least a consistent name for saving
- to directory) of HOST, reusing the hlist if possible. */
- if (opt.add_hostdir)
- {
- /* Add dir_prefix and hostname (if required) to the beginning of
- dir. */
- dirpref = (char *)alloca (strlen (opt.dir_prefix) + 1
- + strlen (u->host)
- + 1 + numdigit (u->port)
- + 1);
- if (!DOTP (opt.dir_prefix))
- sprintf (dirpref, "%s/%s", opt.dir_prefix, u->host);
- else
- strcpy (dirpref, u->host);
+#define FILE_CHAR_TEST(c, mask) (filechr_table[(unsigned char)(c)] & (mask))
- if (u->port != scheme_default_port (u->scheme))
- {
- int len = strlen (dirpref);
- dirpref[len] = ':';
- long_to_string (dirpref + len + 1, u->port);
- }
- }
- else /* not add_hostdir */
- {
- if (!DOTP (opt.dir_prefix))
- dirpref = opt.dir_prefix;
- else
- dirpref = "";
- }
+/* Shorthands for the table: */
+#define U filechr_not_unix
+#define W filechr_not_windows
+#define C filechr_control
- /* If there is a prefix, prepend it. */
- if (*dirpref)
- {
- char *newdir = (char *)alloca (strlen (dirpref) + 1 + strlen (dir) + 2);
- sprintf (newdir, "%s%s%s", dirpref, *dir == '/' ? "" : "/", dir);
- dir = newdir;
- }
+#define UW U|W
+#define UWC U|W|C
- dir_preencoding = dir;
- dir = reencode_string (dir_preencoding);
+/* Table of characters unsafe under various conditions (see above).
- l = strlen (dir);
- if (l && dir[l - 1] == '/')
- dir[l - 1] = '\0';
+ Arguably we could also claim `%' to be unsafe, since we use it as
+ the escape character. If we ever want to be able to reliably
+ translate file name back to URL, this would become important
+ crucial. Right now, it's better to be minimal in escaping. */
- if (!*u->file)
- file = "index.html";
- else
- file = u->file;
-
- /* Finally, construct the full name. */
- res = (char *)xmalloc (strlen (dir) + 1 + strlen (file)
- + (query ? (1 + strlen (query)) : 0)
- + 1);
- sprintf (res, "%s%s%s", dir, *dir ? "/" : "", file);
- if (query)
- {
- strcat (res, "?");
- strcat (res, query);
- }
- if (dir != dir_preencoding)
- xfree (dir);
- return res;
-}
+const static unsigned char filechr_table[256] =
+{
+UWC, C, C, C, C, C, C, C, /* NUL SOH STX ETX EOT ENQ ACK BEL */
+ C, C, C, C, C, C, C, C, /* BS HT LF VT FF CR SO SI */
+ C, C, C, C, C, C, C, C, /* DLE DC1 DC2 DC3 DC4 NAK SYN ETB */
+ C, C, C, C, C, C, C, C, /* CAN EM SUB ESC FS GS RS US */
+ 0, 0, W, 0, 0, 0, 0, 0, /* SP ! " # $ % & ' */
+ 0, 0, W, 0, 0, 0, 0, UW, /* ( ) * + , - . / */
+ 0, 0, 0, 0, 0, 0, 0, 0, /* 0 1 2 3 4 5 6 7 */
+ 0, 0, W, 0, W, 0, W, W, /* 8 9 : ; < = > ? */
+ 0, 0, 0, 0, 0, 0, 0, 0, /* @ A B C D E F G */
+ 0, 0, 0, 0, 0, 0, 0, 0, /* H I J K L M N O */
+ 0, 0, 0, 0, 0, 0, 0, 0, /* P Q R S T U V W */
+ 0, 0, 0, 0, W, 0, 0, 0, /* X Y Z [ \ ] ^ _ */
+ 0, 0, 0, 0, 0, 0, 0, 0, /* ` a b c d e f g */
+ 0, 0, 0, 0, 0, 0, 0, 0, /* h i j k l m n o */
+ 0, 0, 0, 0, 0, 0, 0, 0, /* p q r s t u v w */
+ 0, 0, 0, 0, 0, 0, 0, 0, /* x y z { | } ~ DEL */
-/* Compose a file name out of BASE, an unescaped file name, and QUERY,
- an escaped query string. The trick is to make sure that unsafe
- characters in BASE are escaped, and that slashes in QUERY are also
- escaped. */
+ C, C, C, C, C, C, C, C, C, C, C, C, C, C, C, C, /* 128-143 */
+ C, C, C, C, C, C, C, C, C, C, C, C, C, C, C, C, /* 144-159 */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-static char *
-compose_file_name (char *base, char *query)
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+};
+
+/* FN_PORT_SEP is the separator between host and port in file names
+ for non-standard port numbers. On Unix this is normally ':', as in
+ "www.xemacs.org:4001/index.html". Under Windows, we set it to +
+ because Windows can't handle ':' in file names. */
+#define FN_PORT_SEP (opt.restrict_files_os != restrict_windows ? ':' : '+')
+
+/* FN_QUERY_SEP is the separator between the file name and the URL
+ query, normally '?'. Since Windows cannot handle '?' as part of
+ file name, we use '@' instead there. */
+#define FN_QUERY_SEP (opt.restrict_files_os != restrict_windows ? '?' : '@')
+
+/* Quote path element, characters in [b, e), as file name, and append
+ the quoted string to DEST. Each character is quoted as per
+ file_unsafe_char and the corresponding table. */
+
+static void
+append_uri_pathel (const char *b, const char *e, struct growable *dest)
{
- char result[256];
- char *from;
- char *to = result;
+ char *pathel;
+ int pathlen;
- /* Copy BASE to RESULT and encode all unsafe characters. */
- from = base;
- while (*from && to - result < sizeof (result))
+ const char *p;
+ int quoted, outlen;
+
+ int mask;
+ if (opt.restrict_files_os == restrict_unix)
+ mask = filechr_not_unix;
+ else
+ mask = filechr_not_windows;
+ if (opt.restrict_files_ctrl)
+ mask |= filechr_control;
+
+ /* Copy [b, e) to PATHEL and URL-unescape it. */
+ BOUNDED_TO_ALLOCA (b, e, pathel);
+ url_unescape (pathel);
+ pathlen = strlen (pathel);
+
+ /* Go through PATHEL and check how many characters we'll need to
+ add for file quoting. */
+ quoted = 0;
+ for (p = pathel; *p; p++)
+ if (FILE_CHAR_TEST (*p, mask))
+ ++quoted;
+
+ /* p - pathel is the string length. Each quoted char means two
+ additional characters in the string, hence 2*quoted. */
+ outlen = (p - pathel) + (2 * quoted);
+ GROW (dest, outlen);
+
+ if (!quoted)
{
- if (UNSAFE_CHAR (*from))
- {
- unsigned char c = *from++;
- *to++ = '%';
- *to++ = XDIGIT_TO_XCHAR (c >> 4);
- *to++ = XDIGIT_TO_XCHAR (c & 0xf);
- }
- else
- *to++ = *from++;
+ /* If there's nothing to quote, we don't need to go through the
+ string the second time. */
+ memcpy (TAIL (dest), pathel, outlen);
}
-
- if (query && to - result < sizeof (result))
+ else
{
- *to++ = '?';
-
- /* Copy QUERY to RESULT and encode all '/' characters. */
- from = query;
- while (*from && to - result < sizeof (result))
+ char *q = TAIL (dest);
+ for (p = pathel; *p; p++)
{
- if (*from == '/')
+ if (!FILE_CHAR_TEST (*p, mask))
+ *q++ = *p;
+ else
{
- *to++ = '%';
- *to++ = '2';
- *to++ = 'F';
- ++from;
+ unsigned char ch = *p;
+ *q++ = '%';
+ *q++ = XDIGIT_TO_XCHAR (ch >> 4);
+ *q++ = XDIGIT_TO_XCHAR (ch & 0xf);
}
- else
- *to++ = *from++;
}
+ assert (q - TAIL (dest) == outlen);
}
+ TAIL_INCR (dest, outlen);
+}
- if (to - result < sizeof (result))
- *to = '\0';
- else
- /* Truncate input which is too long, presumably due to a huge
- query string. */
- result[sizeof (result) - 1] = '\0';
+/* Append to DEST the directory structure that corresponds the
+ directory part of URL's path. For example, if the URL is
+ http://server/dir1/dir2/file, this appends "/dir1/dir2".
+
+ Each path element ("dir1" and "dir2" in the above example) is
+ examined, url-unescaped, and re-escaped as file name element.
+
+ Additionally, it cuts as many directories from the path as
+ specified by opt.cut_dirs. For example, if opt.cut_dirs is 1, it
+ will produce "bar" for the above example. For 2 or more, it will
+ produce "".
- return xstrdup (result);
+ Each component of the path is quoted for use as file name. */
+
+static void
+append_dir_structure (const struct url *u, struct growable *dest)
+{
+ char *pathel, *next;
+ int cut = opt.cut_dirs;
+
+ /* Go through the path components, de-URL-quote them, and quote them
+ (if necessary) as file names. */
+
+ pathel = u->path;
+ for (; (next = strchr (pathel, '/')) != NULL; pathel = next + 1)
+ {
+ if (cut-- > 0)
+ continue;
+ if (pathel == next)
+ /* Ignore empty pathels. path_simplify should remove
+ occurrences of "//" from the path, but it has special cases
+ for starting / which generates an empty pathel here. */
+ continue;
+
+ if (dest->tail)
+ append_char ('/', dest);
+ append_uri_pathel (pathel, next, dest);
+ }
}
-/* Create a unique filename, corresponding to a given URL. Calls
- mkstruct if necessary. Does *not* actually create any directories. */
+/* Return a unique file name that matches the given URL as good as
+ possible. Does not create directories on the file system. */
+
char *
-url_filename (const struct url *u)
+url_file_name (const struct url *u)
{
- char *file, *name;
- int have_prefix = 0; /* whether we must prepend opt.dir_prefix */
+ struct growable fnres;
+
+ char *u_file, *u_query;
+ char *fname, *unique;
+
+ fnres.base = NULL;
+ fnres.size = 0;
+ fnres.tail = 0;
+
+ /* Start with the directory prefix, if specified. */
+ if (!DOTP (opt.dir_prefix))
+ append_string (opt.dir_prefix, &fnres);
+ /* If "dirstruct" is turned on (typically the case with -r), add
+ the host and port (unless those have been turned off) and
+ directory structure. */
if (opt.dirstruct)
{
- file = mkstruct (u);
- have_prefix = 1;
- }
- else
- {
- char *base = *u->file ? u->file : "index.html";
- char *query = u->query && *u->query ? u->query : NULL;
- file = compose_file_name (base, query);
+ if (opt.add_hostdir)
+ {
+ if (fnres.tail)
+ append_char ('/', &fnres);
+ append_string (u->host, &fnres);
+ if (u->port != scheme_default_port (u->scheme))
+ {
+ char portstr[24];
+ number_to_string (portstr, u->port);
+ append_char (FN_PORT_SEP, &fnres);
+ append_string (portstr, &fnres);
+ }
+ }
+
+ append_dir_structure (u, &fnres);
}
- if (!have_prefix)
+ /* Add the file name. */
+ if (fnres.tail)
+ append_char ('/', &fnres);
+ u_file = *u->file ? u->file : "index.html";
+ append_uri_pathel (u_file, u_file + strlen (u_file), &fnres);
+
+ /* Append "?query" to the file name. */
+ u_query = u->query && *u->query ? u->query : NULL;
+ if (u_query)
{
- /* Check whether the prefix directory is something other than "."
- before prepending it. */
- if (!DOTP (opt.dir_prefix))
- {
- char *nfile = (char *)xmalloc (strlen (opt.dir_prefix)
- + 1 + strlen (file) + 1);
- sprintf (nfile, "%s/%s", opt.dir_prefix, file);
- xfree (file);
- file = nfile;
- }
+ append_char (FN_QUERY_SEP, &fnres);
+ append_uri_pathel (u_query, u_query + strlen (u_query), &fnres);
}
- /* DOS-ish file systems don't like `%' signs in them; we change it
- to `@'. */
-#ifdef WINDOWS
- {
- char *p = file;
- for (p = file; *p; p++)
- if (*p == '%')
- *p = '@';
- }
-#endif /* WINDOWS */
+
+ /* Zero-terminate the file name. */
+ append_char ('\0', &fnres);
+
+ fname = fnres.base;
/* Check the cases in which the unique extensions are not used:
1) Clobbering is turned off (-nc).
4) Hierarchy is built.
The exception is the case when file does exist and is a
- directory (actually support for bad httpd-s). */
+ directory (see `mkalldirs' for explanation). */
+
if ((opt.noclobber || opt.always_rest || opt.timestamping || opt.dirstruct)
- && !(file_exists_p (file) && !file_non_directory_p (file)))
- return file;
+ && !(file_exists_p (fname) && !file_non_directory_p (fname)))
+ return fname;
- /* Find a unique name. */
- name = unique_name (file);
- xfree (file);
- return name;
+ unique = unique_name (fname, 1);
+ if (unique != fname)
+ xfree (fname);
+ return unique;
}
-/* Like strlen(), but allow the URL to be ended with '?'. */
+/* Return the length of URL's path. Path is considered to be
+ terminated by one of '?', ';', '#', or by the end of the
+ string. */
static int
-urlpath_length (const char *url)
+path_length (const char *url)
{
const char *q = strpbrk_or_eos (url, "?;#");
return q - url;
}
/* Find the last occurrence of character C in the range [b, e), or
- NULL, if none are present. This is almost completely equivalent to
- { *e = '\0'; return strrchr(b); }, except that it doesn't change
- the contents of the string. */
+ NULL, if none are present. This is equivalent to strrchr(b, c),
+ except that it accepts an END argument instead of requiring the
+ string to be zero-terminated. Why is there no memrchr()? */
static const char *
find_last_char (const char *b, const char *e, char c)
{
return e;
return NULL;
}
+\f
+/* Resolve "." and ".." elements of PATH by destructively modifying
+ PATH. "." is resolved by removing that path element, and ".." is
+ resolved by removing the preceding path element. Leading and
+ trailing slashes are preserved.
+
+ Return non-zero if any changes have been made.
+
+ For example, "a/b/c/./../d/.." will yield "a/b/". More exhaustive
+ test examples are provided below. If you change anything in this
+ function, run test_path_simplify to make sure you haven't broken a
+ test case.
+
+ A previous version of this function was based on path_simplify()
+ from GNU Bash, but it has been rewritten for Wget 1.8.1. */
+
+static int
+path_simplify (char *path)
+{
+ int change = 0;
+ char *p, *end;
+
+ if (path[0] == '/')
+ ++path; /* preserve the leading '/'. */
+
+ p = path;
+ end = p + strlen (p) + 1; /* position past the terminating zero. */
+
+ while (1)
+ {
+ again:
+ /* P should point to the beginning of a path element. */
+
+ if (*p == '.' && (*(p + 1) == '/' || *(p + 1) == '\0'))
+ {
+ /* Handle "./foo" by moving "foo" two characters to the
+ left. */
+ if (*(p + 1) == '/')
+ {
+ change = 1;
+ memmove (p, p + 2, end - p);
+ end -= 2;
+ goto again;
+ }
+ else
+ {
+ change = 1;
+ *p = '\0';
+ break;
+ }
+ }
+ else if (*p == '.' && *(p + 1) == '.'
+ && (*(p + 2) == '/' || *(p + 2) == '\0'))
+ {
+ /* Handle "../foo" by moving "foo" one path element to the
+ left. */
+ char *b = p; /* not p-1 because P can equal PATH */
+
+ /* Backtrack by one path element, but not past the beginning
+ of PATH. */
+
+ /* foo/bar/../baz */
+ /* ^ p */
+ /* ^ b */
+
+ if (b > path)
+ {
+ /* Move backwards until B hits the beginning of the
+ previous path element or the beginning of path. */
+ for (--b; b > path && *(b - 1) != '/'; b--)
+ ;
+ }
+
+ change = 1;
+ if (*(p + 2) == '/')
+ {
+ memmove (b, p + 3, end - (p + 3));
+ end -= (p + 3) - b;
+ p = b;
+ }
+ else
+ {
+ *b = '\0';
+ break;
+ }
+
+ goto again;
+ }
+ else if (*p == '/')
+ {
+ /* Remove empty path elements. Not mandated by rfc1808 et
+ al, but it seems like a good idea to get rid of them.
+ Supporting them properly is hard (in which directory do
+ you save http://x.com///y.html?) and they don't seem to
+ bring much gain. */
+ char *q = p;
+ while (*q == '/')
+ ++q;
+ change = 1;
+ if (*q == '\0')
+ {
+ *p = '\0';
+ break;
+ }
+ memmove (p, q, end - q);
+ end -= q - p;
+ goto again;
+ }
+
+ /* Skip to the next path element. */
+ while (*p && *p != '/')
+ ++p;
+ if (*p == '\0')
+ break;
+ /* Make sure P points to the beginning of the next path element,
+ which is location after the slash. */
+ ++p;
+ }
+
+ return change;
+}
+\f
/* Resolve the result of "linking" a base URI (BASE) to a
link-specified URI (LINK).
The parameters LINKLENGTH is useful if LINK is not zero-terminated.
See uri_merge for a gentler interface to this functionality.
- #### This function should handle `./' and `../' so that the evil
- path_simplify can go. */
+ Perhaps this function should call path_simplify so that the callers
+ don't have to call url_parse unconditionally. */
static char *
uri_merge_1 (const char *base, const char *link, int linklength, int no_scheme)
{
if (no_scheme)
{
- const char *end = base + urlpath_length (base);
+ const char *end = base + path_length (base);
if (!*link)
{
memcpy (constr + baselength, link, linklength);
constr[baselength + linklength] = '\0';
}
+ else if (linklength > 1 && *link == '/' && *(link + 1) == '/')
+ {
+ /* LINK begins with "//" and so is a net path: we need to
+ replace everything after (and including) the double slash
+ with LINK. */
+
+ /* uri_merge("foo", "//new/bar") -> "//new/bar" */
+ /* uri_merge("//old/foo", "//new/bar") -> "//new/bar" */
+ /* uri_merge("http://old/foo", "//new/bar") -> "http://new/bar" */
+
+ int span;
+ const char *slash;
+ const char *start_insert;
+
+ /* Look for first slash. */
+ slash = memchr (base, '/', end - base);
+ /* If found slash and it is a double slash, then replace
+ from this point, else default to replacing from the
+ beginning. */
+ if (slash && *(slash + 1) == '/')
+ start_insert = slash;
+ else
+ start_insert = base;
+
+ span = start_insert - base;
+ constr = (char *)xmalloc (span + linklength + 1);
+ if (span)
+ memcpy (constr, base, span);
+ memcpy (constr + span, link, linklength);
+ constr[span + linklength] = '\0';
+ }
else if (*link == '/')
{
/* LINK is an absolute path: we need to replace everything
char *scheme_str = supported_schemes[url->scheme].leading_string;
int fplen = full_path_length (url);
+ int brackets_around_host = 0;
+
assert (scheme_str != NULL);
/* Make sure the user name and password are quoted. */
if (url->user)
{
- quoted_user = encode_string_maybe (url->user);
+ quoted_user = url_escape_allow_passthrough (url->user);
if (url->passwd)
{
if (hide_password)
quoted_passwd = HIDDEN_PASSWORD;
else
- quoted_passwd = encode_string_maybe (url->passwd);
+ quoted_passwd = url_escape_allow_passthrough (url->passwd);
}
}
+ if (strchr (url->host, ':'))
+ brackets_around_host = 1;
+
size = (strlen (scheme_str)
+ strlen (url->host)
+ + (brackets_around_host ? 2 : 0)
+ fplen
+ 1);
if (url->port != scheme_port)
*p++ = '@';
}
+ if (brackets_around_host)
+ *p++ = '[';
APPEND (p, url->host);
+ if (brackets_around_host)
+ *p++ = ']';
if (url->port != scheme_port)
{
*p++ = ':';
- long_to_string (p, url->port);
- p += strlen (p);
+ p = number_to_string (p, url->port);
}
full_path_write (url, p);
return result;
}
\f
-/* Returns proxy host address, in accordance with SCHEME. */
+/* Return the URL of the proxy appropriate for url U. */
char *
-getproxy (enum url_scheme scheme)
+getproxy (struct url *u)
{
char *proxy = NULL;
char *rewritten_url;
static char rewritten_storage[1024];
- switch (scheme)
+ if (!opt.use_proxy)
+ return NULL;
+ if (!no_proxy_match (u->host, (const char **)opt.no_proxy))
+ return NULL;
+
+ switch (u->scheme)
{
case SCHEME_HTTP:
proxy = opt.http_proxy ? opt.http_proxy : getenv ("http_proxy");
if (!proxy || !*proxy)
return NULL;
- /* Handle shorthands. */
+ /* Handle shorthands. `rewritten_storage' is a kludge to allow
+ getproxy() to return static storage. */
rewritten_url = rewrite_shorthand_url (proxy);
if (rewritten_url)
{
return !sufmatch (no_proxy, host);
}
\f
+/* Support for converting links for local viewing in downloaded HTML
+ files. This should be moved to another file, because it has
+ nothing to do with processing URLs. */
+
static void write_backup_file PARAMS ((const char *, downloaded_file_t));
static const char *replace_attr PARAMS ((const char *, int, FILE *,
const char *));
return 0;
}
-/* The idea here was to quote ? as %3F to avoid passing part of the
- file name as the parameter when browsing the converted file through
- HTTP. However, actually doing that breaks local browsing because
- "index.html%3Ffoo=bar" isn't even recognized as an HTML file!
- Perhaps this should be controlled by an option, but for now I'm
- leaving the question marks.
-
- This is the original docstring of this function:
+/* Quote FILE for use as local reference to an HTML file.
- FILE should be a relative link to a local file. It should be
- quoted as HTML because it will be used in HTML context. However,
- we need to quote ? as %3F to avoid passing part of the file name as
- the parameter. (This is not a problem when viewing locally, but is
- if the downloaded and converted tree is served by an HTTP
- server.) */
-
-/* Quote string as HTML. */
+ We quote ? as %3F to avoid passing part of the file name as the
+ parameter when browsing the converted file through HTTP. However,
+ it is safe to do this only when `--html-extension' is turned on.
+ This is because converting "index.html?foo=bar" to
+ "index.html%3Ffoo=bar" would break local browsing, as the latter
+ isn't even recognized as an HTML file! However, converting
+ "index.html?foo=bar.html" to "index.html%3Ffoo=bar.html" should be
+ safe for both local and HTTP-served browsing. */
static char *
local_quote_string (const char *file)
{
- return html_quote_string (file);
-
-#if 0
const char *file_sans_qmark;
- int qm = count_char (file, '?');
+ int qm;
+
+ if (!opt.html_extension)
+ return html_quote_string (file);
+
+ qm = count_char (file, '?');
if (qm)
{
file_sans_qmark = file;
return html_quote_string (file_sans_qmark);
-#endif
}
/* We're storing "modes" of type downloaded_file_t in the hash table.
downloaded_files_hash = NULL;
}
}
+
+/* Return non-zero if scheme a is similar to scheme b.
+
+ Schemes are similar if they are equal. If SSL is supported, schemes
+ are also similar if one is http (SCHEME_HTTP) and the other is https
+ (SCHEME_HTTPS). */
+int
+schemes_are_similar_p (enum url_scheme a, enum url_scheme b)
+{
+ if (a == b)
+ return 1;
+#ifdef HAVE_SSL
+ if ((a == SCHEME_HTTP && b == SCHEME_HTTPS)
+ || (a == SCHEME_HTTPS && b == SCHEME_HTTP))
+ return 1;
+#endif
+ return 0;
+}
+\f
+#if 0
+/* Debugging and testing support for path_simplify. */
+
+/* Debug: run path_simplify on PATH and return the result in a new
+ string. Useful for calling from the debugger. */
+static char *
+ps (char *path)
+{
+ char *copy = xstrdup (path);
+ path_simplify (copy);
+ return copy;
+}
+
+static void
+run_test (char *test, char *expected_result, int expected_change)
+{
+ char *test_copy = xstrdup (test);
+ int modified = path_simplify (test_copy);
+
+ if (0 != strcmp (test_copy, expected_result))
+ {
+ printf ("Failed path_simplify(\"%s\"): expected \"%s\", got \"%s\".\n",
+ test, expected_result, test_copy);
+ }
+ if (modified != expected_change)
+ {
+ if (expected_change == 1)
+ printf ("Expected no modification with path_simplify(\"%s\").\n",
+ test);
+ else
+ printf ("Expected modification with path_simplify(\"%s\").\n",
+ test);
+ }
+ xfree (test_copy);
+}
+
+static void
+test_path_simplify (void)
+{
+ static struct {
+ char *test, *result;
+ int should_modify;
+ } tests[] = {
+ { "", "", 0 },
+ { ".", "", 1 },
+ { "..", "", 1 },
+ { "foo", "foo", 0 },
+ { "foo/bar", "foo/bar", 0 },
+ { "foo///bar", "foo/bar", 1 },
+ { "foo/.", "foo/", 1 },
+ { "foo/./", "foo/", 1 },
+ { "foo./", "foo./", 0 },
+ { "foo/../bar", "bar", 1 },
+ { "foo/../bar/", "bar/", 1 },
+ { "foo/bar/..", "foo/", 1 },
+ { "foo/bar/../x", "foo/x", 1 },
+ { "foo/bar/../x/", "foo/x/", 1 },
+ { "foo/..", "", 1 },
+ { "foo/../..", "", 1 },
+ { "a/b/../../c", "c", 1 },
+ { "./a/../b", "b", 1 }
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE (tests); i++)
+ {
+ char *test = tests[i].test;
+ char *expected_result = tests[i].result;
+ int expected_change = tests[i].should_modify;
+ run_test (test, expected_result, expected_change);
+ }
+
+ /* Now run all the tests with a leading slash before the test case,
+ to prove that the slash is being preserved. */
+ for (i = 0; i < ARRAY_SIZE (tests); i++)
+ {
+ char *test, *expected_result;
+ int expected_change = tests[i].should_modify;
+
+ test = xmalloc (1 + strlen (tests[i].test) + 1);
+ sprintf (test, "/%s", tests[i].test);
+
+ expected_result = xmalloc (1 + strlen (tests[i].result) + 1);
+ sprintf (expected_result, "/%s", tests[i].result);
+
+ run_test (test, expected_result, expected_change);
+
+ xfree (test);
+ xfree (expected_result);
+ }
+}
+#endif
projects / wget / blobdiff