/* File retrieval.
- Copyright (C) 1995, 1996, 1997, 1998, 2000, 2001 Free Software Foundation, Inc.
+ Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
+ 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
This file is part of GNU Wget.
GNU Wget is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or (at
+the Free Software Foundation; either version 3 of the License, or (at
your option) any later version.
GNU Wget is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with Wget; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+along with Wget. If not, see <http://www.gnu.org/licenses/>.
-In addition, as a special exception, the Free Software Foundation
-gives permission to link the code of its release of Wget with the
-OpenSSL project's "OpenSSL" library (or with modified versions of it
-that use the same license as the "OpenSSL" library), and distribute
-the linked executables. You must obey the GNU General Public License
-in all respects for all of the code used other than "OpenSSL". If you
-modify this file, you may extend this exception to your version of the
-file, but you are not obligated to do so. If you do not wish to do
-so, delete this exception statement from your version. */
+Additional permission under GNU GPL version 3 section 7
-#include <config.h>
+If you modify this program, or any covered work, by linking or
+combining it with the OpenSSL project's OpenSSL library (or a
+modified version of that library), containing parts covered by the
+terms of the OpenSSL or SSLeay licenses, the Free Software Foundation
+grants you additional permission to convey the resulting work.
+Corresponding Source for a non-source form of such a combination
+shall include the source code for the parts of OpenSSL used as well
+as that of the covered work. */
+
+#include "wget.h"
#include <stdio.h>
#include <stdlib.h>
-#include <sys/types.h>
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif /* HAVE_UNISTD_H */
#include <errno.h>
-#ifdef HAVE_STRING_H
-# include <string.h>
-#else
-# include <strings.h>
-#endif /* HAVE_STRING_H */
+#include <string.h>
#include <assert.h>
-#include "wget.h"
#include "utils.h"
#include "retr.h"
#include "progress.h"
#include "url.h"
#include "recur.h"
#include "ftp.h"
+#include "http.h"
#include "host.h"
#include "connect.h"
#include "hash.h"
#include "convert.h"
-
-#ifdef HAVE_SSL
-# include "gen_sslfunc.h" /* for ssl_iread */
-#endif
-
-#ifndef errno
-extern int errno;
-#endif
+#include "ptimer.h"
+#include "html-url.h"
+#include "iri.h"
/* Total size of downloaded files. Used to enforce quota. */
-LARGE_INT total_downloaded_bytes;
+SUM_SIZE_INT total_downloaded_bytes;
+
+/* Total download time in seconds. */
+double total_download_time;
/* If non-NULL, the stream to which output should be written. This
stream is initialized when `-O' is used. */
/* Whether output_document is a regular file we can manipulate,
i.e. not `-' or a device file. */
-int output_stream_regular;
+bool output_stream_regular;
\f
static struct {
wgint chunk_bytes;
static void
limit_bandwidth_reset (void)
{
- limit_data.chunk_bytes = 0;
- limit_data.chunk_start = 0;
+ xzero (limit_data);
}
/* Limit the bandwidth by pausing the download for an amount of time.
is the timer that started at the beginning of download. */
static void
-limit_bandwidth (wgint bytes, struct wget_timer *timer)
+limit_bandwidth (wgint bytes, struct ptimer *timer)
{
- double delta_t = wtimer_read (timer) - limit_data.chunk_start;
+ double delta_t = ptimer_read (timer) - limit_data.chunk_start;
double expected;
limit_data.chunk_bytes += bytes;
/* Calculate the amount of time we expect downloading the chunk
should take. If in reality it took less time, sleep to
compensate for the difference. */
- expected = 1000.0 * limit_data.chunk_bytes / opt.limit_rate;
+ expected = (double) limit_data.chunk_bytes / opt.limit_rate;
if (expected > delta_t)
{
double slp = expected - delta_t + limit_data.sleep_adjust;
double t0, t1;
- if (slp < 200)
- {
- DEBUGP (("deferring a %.2f ms sleep (%s/%.2f).\n",
- slp, number_to_static_string (limit_data.chunk_bytes),
- delta_t));
- return;
- }
+ if (slp < 0.2)
+ {
+ DEBUGP (("deferring a %.2f ms sleep (%s/%.2f).\n",
+ slp * 1000, number_to_static_string (limit_data.chunk_bytes),
+ delta_t));
+ return;
+ }
DEBUGP (("\nsleeping %.2f ms for %s bytes, adjust %.2f ms\n",
- slp, number_to_static_string (limit_data.chunk_bytes),
- limit_data.sleep_adjust));
+ slp * 1000, number_to_static_string (limit_data.chunk_bytes),
+ limit_data.sleep_adjust));
- t0 = wtimer_read (timer);
- xsleep (slp / 1000);
- wtimer_update (timer);
- t1 = wtimer_read (timer);
+ t0 = ptimer_read (timer);
+ xsleep (slp);
+ t1 = ptimer_measure (timer);
/* Due to scheduling, we probably slept slightly longer (or
- shorter) than desired. Calculate the difference between the
- desired and the actual sleep, and adjust the next sleep by
- that amount. */
+ shorter) than desired. Calculate the difference between the
+ desired and the actual sleep, and adjust the next sleep by
+ that amount. */
limit_data.sleep_adjust = slp - (t1 - t0);
+ /* If sleep_adjust is very large, it's likely due to suspension
+ and not clock inaccuracy. Don't enforce those. */
+ if (limit_data.sleep_adjust > 0.5)
+ limit_data.sleep_adjust = 0.5;
+ else if (limit_data.sleep_adjust < -0.5)
+ limit_data.sleep_adjust = -0.5;
}
limit_data.chunk_bytes = 0;
- limit_data.chunk_start = wtimer_read (timer);
+ limit_data.chunk_start = ptimer_read (timer);
}
#ifndef MIN
static int
write_data (FILE *out, const char *buf, int bufsize, wgint *skip,
- wgint *written)
+ wgint *written)
{
if (!out)
return 1;
bufsize -= *skip;
*skip = 0;
if (bufsize == 0)
- return 1;
+ return 1;
}
fwrite (buf, 1, bufsize, out);
performance: fast downloads will arrive in large 16K chunks
(which stdio would write out immediately anyway), and slow
downloads wouldn't be limited by disk speed. */
+
+ /* 2005-04-20 SMS.
+ Perhaps it shouldn't hinder performance, but it sure does, at least
+ on VMS (more than 2X). Rather than speculate on what it should or
+ shouldn't do, it might make more sense to test it. Even better, it
+ might be nice to explain what possible benefit it could offer, as
+ it appears to be a clear invitation to poor performance with no
+ actual justification. (Also, why 16K? Anyone test other values?)
+ */
+#ifndef __VMS
fflush (out);
+#endif /* ndef __VMS */
return !ferror (out);
}
is incremented by the amount of data read from the network. If
QTYWRITTEN is non-NULL, the value it points to is incremented by
the amount of data written to disk. The time it took to download
- the data (in milliseconds) is stored to ELAPSED.
+ the data is stored to ELAPSED.
The function exits and returns the amount of data read. In case of
error while reading data, -1 is returned. In case of error while
int
fd_read_body (int fd, FILE *out, wgint toread, wgint startpos,
- wgint *qtyread, wgint *qtywritten, double *elapsed, int flags)
+ wgint *qtyread, wgint *qtywritten, double *elapsed, int flags)
{
int ret = 0;
static char dlbuf[16384];
int dlbufsize = sizeof (dlbuf);
- struct wget_timer *timer = NULL;
+ struct ptimer *timer = NULL;
double last_successful_read_tm = 0;
/* The progress gauge, set according to the user preferences. */
continually update the display. When true, smaller timeout
values are used so that the gauge can update the display when
data arrives slowly. */
- int progress_interactive = 0;
+ bool progress_interactive = false;
- int exact = flags & rb_read_exactly;
+ bool exact = !!(flags & rb_read_exactly);
wgint skip = 0;
/* How much data we've read/written. */
if (opt.verbose)
{
/* If we're skipping STARTPOS bytes, pass 0 as the INITIAL
- argument to progress_create because the indicator doesn't
- (yet) know about "skipping" data. */
- progress = progress_create (skip ? 0 : startpos, startpos + toread);
+ argument to progress_create because the indicator doesn't
+ (yet) know about "skipping" data. */
+ wgint start = skip ? 0 : startpos;
+ progress = progress_create (start, start + toread);
progress_interactive = progress_interactive_p (progress);
}
the timer. */
if (progress || opt.limit_rate || elapsed)
{
- timer = wtimer_new ();
+ timer = ptimer_new ();
last_successful_read_tm = 0;
}
int rdsize = exact ? MIN (toread - sum_read, dlbufsize) : dlbufsize;
double tmout = opt.read_timeout;
if (progress_interactive)
- {
- /* For interactive progress gauges, always specify a ~1s
- timeout, so that the gauge can be updated regularly even
- when the data arrives very slowly or stalls. */
- tmout = 0.95;
- if (opt.read_timeout)
- {
- double waittm;
- waittm = (wtimer_read (timer) - last_successful_read_tm) / 1000;
- if (waittm + tmout > opt.read_timeout)
- {
- /* Don't let total idle time exceed read timeout. */
- tmout = opt.read_timeout - waittm;
- if (tmout < 0)
- {
- /* We've already exceeded the timeout. */
- ret = -1, errno = ETIMEDOUT;
- break;
- }
- }
- }
- }
+ {
+ /* For interactive progress gauges, always specify a ~1s
+ timeout, so that the gauge can be updated regularly even
+ when the data arrives very slowly or stalls. */
+ tmout = 0.95;
+ if (opt.read_timeout)
+ {
+ double waittm;
+ waittm = ptimer_read (timer) - last_successful_read_tm;
+ if (waittm + tmout > opt.read_timeout)
+ {
+ /* Don't let total idle time exceed read timeout. */
+ tmout = opt.read_timeout - waittm;
+ if (tmout < 0)
+ {
+ /* We've already exceeded the timeout. */
+ ret = -1, errno = ETIMEDOUT;
+ break;
+ }
+ }
+ }
+ }
ret = fd_read (fd, dlbuf, rdsize, tmout);
- if (ret == 0 || (ret < 0 && errno != ETIMEDOUT))
- break; /* read error */
- else if (ret < 0)
- ret = 0; /* read timeout */
+ if (progress_interactive && ret < 0 && errno == ETIMEDOUT)
+ ret = 0; /* interactive timeout, handled above */
+ else if (ret <= 0)
+ break; /* EOF or read error */
if (progress || opt.limit_rate)
- {
- wtimer_update (timer);
- if (ret > 0)
- last_successful_read_tm = wtimer_read (timer);
- }
+ {
+ ptimer_measure (timer);
+ if (ret > 0)
+ last_successful_read_tm = ptimer_read (timer);
+ }
if (ret > 0)
- {
- sum_read += ret;
- if (!write_data (out, dlbuf, ret, &skip, &sum_written))
- {
- ret = -2;
- goto out;
- }
- }
+ {
+ sum_read += ret;
+ if (!write_data (out, dlbuf, ret, &skip, &sum_written))
+ {
+ ret = -2;
+ goto out;
+ }
+ }
if (opt.limit_rate)
- limit_bandwidth (ret, timer);
+ limit_bandwidth (ret, timer);
if (progress)
- progress_update (progress, ret, wtimer_read (timer));
+ progress_update (progress, ret, ptimer_read (timer));
#ifdef WINDOWS
if (toread > 0 && !opt.quiet)
- ws_percenttitle (100.0 *
- (startpos + sum_read) / (startpos + toread));
+ ws_percenttitle (100.0 *
+ (startpos + sum_read) / (startpos + toread));
#endif
}
if (ret < -1)
out:
if (progress)
- progress_finish (progress, wtimer_read (timer));
+ progress_finish (progress, ptimer_read (timer));
if (elapsed)
- *elapsed = wtimer_read (timer);
+ *elapsed = ptimer_read (timer);
if (timer)
- wtimer_delete (timer);
+ ptimer_destroy (timer);
if (qtyread)
*qtyread += sum_read;
return ret;
}
\f
-/* Read a hunk of data from FD, up until a terminator. The terminator
- is whatever the TERMINATOR function determines it to be; for
- example, it can be a line of data, or the head of an HTTP response.
- The function returns the data read allocated with malloc.
-
- In case of error, NULL is returned. In case of EOF and no data
- read, NULL is returned and errno set to 0. In case of EOF with
- data having been read, the data is returned, but it will
- (obviously) not contain the terminator.
+/* Read a hunk of data from FD, up until a terminator. The hunk is
+ limited by whatever the TERMINATOR callback chooses as its
+ terminator. For example, if terminator stops at newline, the hunk
+ will consist of a line of data; if terminator stops at two
+ newlines, it can be used to read the head of an HTTP response.
+ Upon determining the boundary, the function returns the data (up to
+ the terminator) in malloc-allocated storage.
+
+ In case of read error, NULL is returned. In case of EOF and no
+ data read, NULL is returned and errno set to 0. In case of having
+ read some data, but encountering EOF before seeing the terminator,
+ the data that has been read is returned, but it will (obviously)
+ not contain the terminator.
+
+ The TERMINATOR function is called with three arguments: the
+ beginning of the data read so far, the beginning of the current
+ block of peeked-at data, and the length of the current block.
+ Depending on its needs, the function is free to choose whether to
+ analyze all data or just the newly arrived data. If TERMINATOR
+ returns NULL, it means that the terminator has not been seen.
+ Otherwise it should return a pointer to the charactre immediately
+ following the terminator.
The idea is to be able to read a line of input, or otherwise a hunk
of text, such as the head of an HTTP request, without crossing the
boundary, so that the next call to fd_read etc. reads the data
after the hunk. To achieve that, this function does the following:
- 1. Peek at available data.
+ 1. Peek at incoming data.
2. Determine whether the peeked data, along with the previously
read data, includes the terminator.
{
long bufsize = sizehint;
char *hunk = xmalloc (bufsize);
- int tail = 0; /* tail position in HUNK */
+ int tail = 0; /* tail position in HUNK */
- assert (maxsize >= bufsize);
+ assert (!maxsize || maxsize >= bufsize);
while (1)
{
pklen = fd_peek (fd, hunk + tail, bufsize - 1 - tail, -1);
if (pklen < 0)
- {
- xfree (hunk);
- return NULL;
- }
- end = terminator (hunk, tail, pklen);
+ {
+ xfree (hunk);
+ return NULL;
+ }
+ end = terminator (hunk, hunk + tail, pklen);
if (end)
- {
- /* The data contains the terminator: we'll drain the data up
- to the end of the terminator. */
- remain = end - (hunk + tail);
- if (remain == 0)
- {
- /* No more data needs to be read. */
- hunk[tail] = '\0';
- return hunk;
- }
- if (bufsize - 1 < tail + remain)
- {
- bufsize = tail + remain + 1;
- hunk = xrealloc (hunk, bufsize);
- }
- }
+ {
+ /* The data contains the terminator: we'll drain the data up
+ to the end of the terminator. */
+ remain = end - (hunk + tail);
+ assert (remain >= 0);
+ if (remain == 0)
+ {
+ /* No more data needs to be read. */
+ hunk[tail] = '\0';
+ return hunk;
+ }
+ if (bufsize - 1 < tail + remain)
+ {
+ bufsize = tail + remain + 1;
+ hunk = xrealloc (hunk, bufsize);
+ }
+ }
else
- /* No terminator: simply read the data we know is (or should
- be) available. */
- remain = pklen;
+ /* No terminator: simply read the data we know is (or should
+ be) available. */
+ remain = pklen;
/* Now, read the data. Note that we make no assumptions about
- how much data we'll get. (Some TCP stacks are notorious for
- read returning less data than the previous MSG_PEEK.) */
+ how much data we'll get. (Some TCP stacks are notorious for
+ read returning less data than the previous MSG_PEEK.) */
rdlen = fd_read (fd, hunk + tail, remain, 0);
if (rdlen < 0)
- {
- xfree_null (hunk);
- return NULL;
- }
+ {
+ xfree_null (hunk);
+ return NULL;
+ }
tail += rdlen;
hunk[tail] = '\0';
if (rdlen == 0)
- {
- if (tail == 0)
- {
- /* EOF without anything having been read */
- xfree (hunk);
- errno = 0;
- return NULL;
- }
- else
- /* EOF seen: return the data we've read. */
- return hunk;
- }
+ {
+ if (tail == 0)
+ {
+ /* EOF without anything having been read */
+ xfree (hunk);
+ errno = 0;
+ return NULL;
+ }
+ else
+ /* EOF seen: return the data we've read. */
+ return hunk;
+ }
if (end && rdlen == remain)
- /* The terminator was seen and the remaining data drained --
- we got what we came for. */
- return hunk;
+ /* The terminator was seen and the remaining data drained --
+ we got what we came for. */
+ return hunk;
/* Keep looping until all the data arrives. */
if (tail == bufsize - 1)
- {
- /* Double the buffer size, but refuse to allocate more than
- MAXSIZE bytes. */
- if (maxsize && bufsize >= maxsize)
- {
- xfree (hunk);
- errno = ENOMEM;
- return NULL;
- }
- bufsize <<= 1;
- if (maxsize && bufsize > maxsize)
- bufsize = maxsize;
- hunk = xrealloc (hunk, bufsize);
- }
+ {
+ /* Double the buffer size, but refuse to allocate more than
+ MAXSIZE bytes. */
+ if (maxsize && bufsize >= maxsize)
+ {
+ xfree (hunk);
+ errno = ENOMEM;
+ return NULL;
+ }
+ bufsize <<= 1;
+ if (maxsize && bufsize > maxsize)
+ bufsize = maxsize;
+ hunk = xrealloc (hunk, bufsize);
+ }
}
}
static const char *
-line_terminator (const char *hunk, int oldlen, int peeklen)
+line_terminator (const char *start, const char *peeked, int peeklen)
{
- const char *p = memchr (hunk + oldlen, '\n', peeklen);
+ const char *p = memchr (peeked, '\n', peeklen);
if (p)
- /* p+1 because we want the line to include '\n' */
+ /* p+1 because the line must include '\n' */
return p + 1;
return NULL;
}
return fd_read_hunk (fd, line_terminator, 128, FD_READ_LINE_MAX);
}
\f
-/* Return a printed representation of the download rate, as
- appropriate for the speed. If PAD is non-zero, strings will be
- padded to the width of 7 characters (xxxx.xx). */
-char *
-retr_rate (wgint bytes, double msecs, int pad)
+/* Return a printed representation of the download rate, along with
+ the units appropriate for the download speed. */
+
+const char *
+retr_rate (wgint bytes, double secs)
{
static char res[20];
static const char *rate_names[] = {"B/s", "KB/s", "MB/s", "GB/s" };
- int units = 0;
+ int units;
- double dlrate = calc_rate (bytes, msecs, &units);
- sprintf (res, pad ? "%7.2f %s" : "%.2f %s", dlrate, rate_names[units]);
+ double dlrate = calc_rate (bytes, secs, &units);
+ /* Use more digits for smaller numbers (regardless of unit used),
+ e.g. "1022", "247", "12.5", "2.38". */
+ sprintf (res, "%.*f %s",
+ dlrate >= 99.95 ? 0 : dlrate >= 9.995 ? 1 : 2,
+ dlrate, rate_names[units]);
return res;
}
UNITS is zero for B/s, one for KB/s, two for MB/s, and three for
GB/s. */
+
double
-calc_rate (wgint bytes, double msecs, int *units)
+calc_rate (wgint bytes, double secs, int *units)
{
double dlrate;
- assert (msecs >= 0);
+ assert (secs >= 0);
assert (bytes >= 0);
- if (msecs == 0)
+ if (secs == 0)
/* If elapsed time is exactly zero, it means we're under the
- granularity of the timer. This often happens on systems that
- use time() for the timer. */
- msecs = wtimer_granularity ();
+ resolution of the timer. This can easily happen on systems
+ that use time() for the timer. Since the interval lies between
+ 0 and the timer's resolution, assume half the resolution. */
+ secs = ptimer_resolution () / 2.0;
- dlrate = (double)1000 * bytes / msecs;
+ dlrate = bytes / secs;
if (dlrate < 1024.0)
*units = 0;
else if (dlrate < 1024.0 * 1024.0)
return dlrate;
}
\f
-/* Maximum number of allowed redirections. 20 was chosen as a
- "reasonable" value, which is low enough to not cause havoc, yet
- high enough to guarantee that normal retrievals will not be hurt by
- the check. */
-
-#define MAX_REDIRECTIONS 20
-
-#define SUSPEND_POST_DATA do { \
- post_data_suspended = 1; \
- saved_post_data = opt.post_data; \
- saved_post_file_name = opt.post_file_name; \
- opt.post_data = NULL; \
- opt.post_file_name = NULL; \
+
+#define SUSPEND_POST_DATA do { \
+ post_data_suspended = true; \
+ saved_post_data = opt.post_data; \
+ saved_post_file_name = opt.post_file_name; \
+ opt.post_data = NULL; \
+ opt.post_file_name = NULL; \
} while (0)
-#define RESTORE_POST_DATA do { \
- if (post_data_suspended) \
- { \
- opt.post_data = saved_post_data; \
- opt.post_file_name = saved_post_file_name; \
- post_data_suspended = 0; \
- } \
+#define RESTORE_POST_DATA do { \
+ if (post_data_suspended) \
+ { \
+ opt.post_data = saved_post_data; \
+ opt.post_file_name = saved_post_file_name; \
+ post_data_suspended = false; \
+ } \
} while (0)
-static char *getproxy PARAMS ((struct url *));
+static char *getproxy (struct url *);
/* Retrieve the given URL. Decides which loop to call -- HTTP, FTP,
FTP, proxy, etc. */
multiple points. */
uerr_t
-retrieve_url (const char *origurl, char **file, char **newloc,
- const char *refurl, int *dt)
+retrieve_url (struct url * orig_parsed, const char *origurl, char **file,
+ char **newloc, const char *refurl, int *dt, bool recursive,
+ struct iri *iri)
{
uerr_t result;
char *url;
- int location_changed, dummy;
+ bool location_changed;
+ bool iri_fallbacked = 0;
+ int dummy;
char *mynewloc, *proxy;
- struct url *u, *proxy_url;
- int up_error_code; /* url parse error code */
+ struct url *u = orig_parsed, *proxy_url;
+ int up_error_code; /* url parse error code */
char *local_file;
int redirection_count = 0;
- int post_data_suspended = 0;
+ bool post_data_suspended = false;
char *saved_post_data = NULL;
char *saved_post_file_name = NULL;
if (file)
*file = NULL;
- u = url_parse (url, &up_error_code);
- if (!u)
- {
- logprintf (LOG_NOTQUIET, "%s: %s.\n", url, url_error (up_error_code));
- xfree (url);
- return URLERROR;
- }
-
if (!refurl)
refurl = opt.referer;
redirected:
+ /* (also for IRI fallbacking) */
result = NOCONERROR;
mynewloc = NULL;
proxy = getproxy (u);
if (proxy)
{
+ struct iri *pi = iri_new ();
+ set_uri_encoding (pi, opt.locale, true);
+ pi->utf8_encode = false;
+
/* Parse the proxy URL. */
- proxy_url = url_parse (proxy, &up_error_code);
+ proxy_url = url_parse (proxy, &up_error_code, NULL, true);
if (!proxy_url)
- {
- logprintf (LOG_NOTQUIET, _("Error parsing proxy URL %s: %s.\n"),
- proxy, url_error (up_error_code));
- xfree (url);
- RESTORE_POST_DATA;
- return PROXERR;
- }
+ {
+ char *error = url_error (proxy, up_error_code);
+ logprintf (LOG_NOTQUIET, _("Error parsing proxy URL %s: %s.\n"),
+ proxy, error);
+ xfree (url);
+ xfree (error);
+ RESTORE_POST_DATA;
+ return PROXERR;
+ }
if (proxy_url->scheme != SCHEME_HTTP && proxy_url->scheme != u->scheme)
- {
- logprintf (LOG_NOTQUIET, _("Error in proxy URL %s: Must be HTTP.\n"), proxy);
- url_free (proxy_url);
- xfree (url);
- RESTORE_POST_DATA;
- return PROXERR;
- }
+ {
+ logprintf (LOG_NOTQUIET, _("Error in proxy URL %s: Must be HTTP.\n"), proxy);
+ url_free (proxy_url);
+ xfree (url);
+ RESTORE_POST_DATA;
+ return PROXERR;
+ }
}
if (u->scheme == SCHEME_HTTP
#endif
|| (proxy_url && proxy_url->scheme == SCHEME_HTTP))
{
- result = http_loop (u, &mynewloc, &local_file, refurl, dt, proxy_url);
+ result = http_loop (u, &mynewloc, &local_file, refurl, dt, proxy_url, iri);
}
else if (u->scheme == SCHEME_FTP)
{
- /* If this is a redirection, we must not allow recursive FTP
- retrieval, so we save recursion to oldrec, and restore it
- later. */
- int oldrec = opt.recursive;
+ /* If this is a redirection, temporarily turn off opt.ftp_glob
+ and opt.recursive, both being undesirable when following
+ redirects. */
+ bool oldrec = recursive, glob = opt.ftp_glob;
if (redirection_count)
- opt.recursive = 0;
- result = ftp_loop (u, dt, proxy_url);
- opt.recursive = oldrec;
+ oldrec = glob = false;
+
+ result = ftp_loop (u, dt, proxy_url, recursive, glob);
+ recursive = oldrec;
/* There is a possibility of having HTTP being redirected to
- FTP. In these cases we must decide whether the text is HTML
- according to the suffix. The HTML suffixes are `.html',
- `.htm' and a few others, case-insensitive. */
+ FTP. In these cases we must decide whether the text is HTML
+ according to the suffix. The HTML suffixes are `.html',
+ `.htm' and a few others, case-insensitive. */
if (redirection_count && local_file && u->scheme == SCHEME_FTP)
- {
- if (has_html_suffix_p (local_file))
- *dt |= TEXTHTML;
- }
+ {
+ if (has_html_suffix_p (local_file))
+ *dt |= TEXTHTML;
+ }
}
if (proxy_url)
assert (mynewloc != NULL);
if (local_file)
- xfree (local_file);
+ xfree (local_file);
/* The HTTP specs only allow absolute URLs to appear in
- redirects, but a ton of boneheaded webservers and CGIs out
- there break the rules and use relative URLs, and popular
- browsers are lenient about this, so wget should be too. */
+ redirects, but a ton of boneheaded webservers and CGIs out
+ there break the rules and use relative URLs, and popular
+ browsers are lenient about this, so wget should be too. */
construced_newloc = uri_merge (url, mynewloc);
xfree (mynewloc);
mynewloc = construced_newloc;
+ /* Reset UTF-8 encoding state, keep the URI encoding and reset
+ the content encoding. */
+ iri->utf8_encode = opt.enable_iri;
+ set_content_encoding (iri, NULL);
+ xfree_null (iri->orig_url);
+
/* Now, see if this new location makes sense. */
- newloc_parsed = url_parse (mynewloc, &up_error_code);
+ newloc_parsed = url_parse (mynewloc, &up_error_code, iri, true);
if (!newloc_parsed)
- {
- logprintf (LOG_NOTQUIET, "%s: %s.\n", escnonprint_uri (mynewloc),
- url_error (up_error_code));
- url_free (u);
- xfree (url);
- xfree (mynewloc);
- RESTORE_POST_DATA;
- return result;
- }
+ {
+ char *error = url_error (mynewloc, up_error_code);
+ logprintf (LOG_NOTQUIET, "%s: %s.\n", escnonprint_uri (mynewloc),
+ error);
+ if (orig_parsed != u)
+ {
+ url_free (u);
+ }
+ xfree (url);
+ xfree (mynewloc);
+ xfree (error);
+ RESTORE_POST_DATA;
+ return result;
+ }
/* Now mynewloc will become newloc_parsed->url, because if the
Location contained relative paths like .././something, we
mynewloc = xstrdup (newloc_parsed->url);
/* Check for max. number of redirections. */
- if (++redirection_count > MAX_REDIRECTIONS)
- {
- logprintf (LOG_NOTQUIET, _("%d redirections exceeded.\n"),
- MAX_REDIRECTIONS);
- url_free (newloc_parsed);
- url_free (u);
- xfree (url);
- xfree (mynewloc);
- RESTORE_POST_DATA;
- return WRONGCODE;
- }
+ if (++redirection_count > opt.max_redirect)
+ {
+ logprintf (LOG_NOTQUIET, _("%d redirections exceeded.\n"),
+ opt.max_redirect);
+ url_free (newloc_parsed);
+ if (orig_parsed != u)
+ {
+ url_free (u);
+ }
+ xfree (url);
+ xfree (mynewloc);
+ RESTORE_POST_DATA;
+ return WRONGCODE;
+ }
xfree (url);
url = mynewloc;
- url_free (u);
+ if (orig_parsed != u)
+ {
+ url_free (u);
+ }
u = newloc_parsed;
/* If we're being redirected from POST, we don't want to POST
- again. Many requests answer POST with a redirection to an
- index page; that redirection is clearly a GET. We "suspend"
- POST data for the duration of the redirections, and restore
- it when we're done. */
+ again. Many requests answer POST with a redirection to an
+ index page; that redirection is clearly a GET. We "suspend"
+ POST data for the duration of the redirections, and restore
+ it when we're done. */
if (!post_data_suspended)
- SUSPEND_POST_DATA;
+ SUSPEND_POST_DATA;
goto redirected;
}
- if (local_file)
+ /* Try to not encode in UTF-8 if fetching failed */
+ if (!(*dt & RETROKF) && iri->utf8_encode)
{
+ iri->utf8_encode = false;
+ if (orig_parsed != u)
+ {
+ url_free (u);
+ }
+ u = url_parse (origurl, NULL, iri, true);
+ if (u)
+ {
+ DEBUGP (("[IRI fallbacking to non-utf8 for %s\n", quote (url)));
+ url = xstrdup (u->url);
+ iri_fallbacked = 1;
+ goto redirected;
+ }
+ else
+ DEBUGP (("[Couldn't fallback to non-utf8 for %s\n", quote (url)));
+ }
+
+ if (local_file && *dt & RETROKF)
+ {
+ register_download (u->url, local_file);
+ if (redirection_count && 0 != strcmp (origurl, u->url))
+ register_redirection (origurl, u->url);
+ if (*dt & TEXTHTML)
+ register_html (u->url, local_file);
if (*dt & RETROKF)
- {
- register_download (u->url, local_file);
- if (redirection_count && 0 != strcmp (origurl, u->url))
- register_redirection (origurl, u->url);
- if (*dt & TEXTHTML)
- register_html (u->url, local_file);
- }
+ {
+ register_download (u->url, local_file);
+ if (redirection_count && 0 != strcmp (origurl, u->url))
+ register_redirection (origurl, u->url);
+ if (*dt & TEXTHTML)
+ register_html (u->url, local_file);
+ if (*dt & TEXTCSS)
+ register_css (u->url, local_file);
+ }
}
if (file)
else
xfree_null (local_file);
- url_free (u);
+ if (orig_parsed != u)
+ {
+ url_free (u);
+ }
- if (redirection_count)
+ if (redirection_count || iri_fallbacked)
{
if (newloc)
- *newloc = url;
+ *newloc = url;
else
- xfree (url);
+ xfree (url);
}
else
{
if (newloc)
- *newloc = NULL;
+ *newloc = NULL;
xfree (url);
}
return result;
}
-/* Find the URLs in the file and call retrieve_url() for each of
- them. If HTML is non-zero, treat the file as HTML, and construct
- the URLs accordingly.
+/* Find the URLs in the file and call retrieve_url() for each of them.
+ If HTML is true, treat the file as HTML, and construct the URLs
+ accordingly.
If opt.recursive is set, call retrieve_tree() for each file. */
uerr_t
-retrieve_from_file (const char *file, int html, int *count)
+retrieve_from_file (const char *file, bool html, int *count)
{
uerr_t status;
struct urlpos *url_list, *cur_url;
+ struct iri *iri = iri_new();
+
+ char *input_file = NULL;
+ const char *url = file;
- url_list = (html ? get_urls_html (file, NULL, NULL)
- : get_urls_file (file));
status = RETROK; /* Suppose everything is OK. */
*count = 0; /* Reset the URL count. */
+ /* sXXXav : Assume filename and links in the file are in the locale */
+ set_uri_encoding (iri, opt.locale, true);
+ set_content_encoding (iri, opt.locale);
+
+ if (url_has_scheme (url))
+ {
+ int dt,url_err;
+ uerr_t status;
+ struct url * url_parsed = url_parse(url, &url_err, iri, true);
+
+ if (!url_parsed)
+ {
+ char *error = url_error (url, url_err);
+ logprintf (LOG_NOTQUIET, "%s: %s.\n", url, error);
+ xfree (error);
+ return URLERROR;
+ }
+
+ if (!opt.base_href)
+ opt.base_href = xstrdup (url);
+
+ status = retrieve_url (url_parsed, url, &input_file, NULL, NULL, &dt,
+ false, iri);
+ if (status != RETROK)
+ return status;
+
+ if (dt & TEXTHTML)
+ html = true;
+
+ /* If we have a found a content encoding, use it.
+ * ( == is okay, because we're checking for identical object) */
+ if (iri->content_encoding != opt.locale)
+ set_uri_encoding (iri, iri->content_encoding, false);
+
+ /* Reset UTF-8 encode status */
+ iri->utf8_encode = opt.enable_iri;
+ xfree_null (iri->orig_url);
+ iri->orig_url = NULL;
+ }
+ else
+ input_file = (char *) file;
+
+ url_list = (html ? get_urls_html (input_file, NULL, NULL, iri)
+ : get_urls_file (input_file));
+
for (cur_url = url_list; cur_url; cur_url = cur_url->next, ++*count)
{
char *filename = NULL, *new_file = NULL;
int dt;
+ struct iri *tmpiri = iri_dup (iri);
+ struct url *parsed_url = NULL;
if (cur_url->ignore_when_downloading)
- continue;
+ continue;
if (opt.quota && total_downloaded_bytes > opt.quota)
- {
- status = QUOTEXC;
- break;
- }
+ {
+ status = QUOTEXC;
+ break;
+ }
+
+ /* Need to reparse the url, since it didn't have iri information. */
+ if (opt.enable_iri)
+ parsed_url = url_parse (cur_url->url->url, NULL, tmpiri, true);
+
if ((opt.recursive || opt.page_requisites)
- && cur_url->url->scheme != SCHEME_FTP)
- status = retrieve_tree (cur_url->url->url);
+ && (cur_url->url->scheme != SCHEME_FTP || getproxy (cur_url->url)))
+ {
+ int old_follow_ftp = opt.follow_ftp;
+
+ /* Turn opt.follow_ftp on in case of recursive FTP retrieval */
+ if (cur_url->url->scheme == SCHEME_FTP)
+ opt.follow_ftp = 1;
+
+ status = retrieve_tree (parsed_url ? parsed_url : cur_url->url,
+ tmpiri);
+
+ opt.follow_ftp = old_follow_ftp;
+ }
else
- status = retrieve_url (cur_url->url->url, &filename, &new_file, NULL, &dt);
+ status = retrieve_url (parsed_url ? parsed_url : cur_url->url,
+ cur_url->url->url, &filename,
+ &new_file, NULL, &dt, opt.recursive, tmpiri);
+
+ if (parsed_url)
+ url_free (parsed_url);
if (filename && opt.delete_after && file_exists_p (filename))
- {
- DEBUGP (("Removing file due to --delete-after in"
- " retrieve_from_file():\n"));
- logprintf (LOG_VERBOSE, _("Removing %s.\n"), filename);
- if (unlink (filename))
- logprintf (LOG_NOTQUIET, "unlink: %s\n", strerror (errno));
- dt &= ~RETROKF;
- }
+ {
+ DEBUGP (("\
+Removing file due to --delete-after in retrieve_from_file():\n"));
+ logprintf (LOG_VERBOSE, _("Removing %s.\n"), filename);
+ if (unlink (filename))
+ logprintf (LOG_NOTQUIET, "unlink: %s\n", strerror (errno));
+ dt &= ~RETROKF;
+ }
xfree_null (new_file);
xfree_null (filename);
+ iri_free (tmpiri);
}
/* Free the linked list of URL-s. */
free_urlpos (url_list);
+ iri_free (iri);
+
return status;
}
void
sleep_between_retrievals (int count)
{
- static int first_retrieval = 1;
+ static bool first_retrieval = true;
if (first_retrieval)
{
/* Don't sleep before the very first retrieval. */
- first_retrieval = 0;
+ first_retrieval = false;
return;
}
if (opt.waitretry && count > 1)
{
/* If opt.waitretry is specified and this is a retry, wait for
- COUNT-1 number of seconds, or for opt.waitretry seconds. */
+ COUNT-1 number of seconds, or for opt.waitretry seconds. */
if (count <= opt.waitretry)
- xsleep (count - 1);
+ xsleep (count - 1);
else
- xsleep (opt.waitretry);
+ xsleep (opt.waitretry);
}
else if (opt.wait)
{
if (!opt.random_wait || count > 1)
- /* If random-wait is not specified, or if we are sleeping
- between retries of the same download, sleep the fixed
- interval. */
- xsleep (opt.wait);
+ /* If random-wait is not specified, or if we are sleeping
+ between retries of the same download, sleep the fixed
+ interval. */
+ xsleep (opt.wait);
else
- {
- /* Sleep a random amount of time averaging in opt.wait
- seconds. The sleeping amount ranges from 0 to
- opt.wait*2, inclusive. */
- double waitsecs = 2 * opt.wait * random_float ();
- DEBUGP (("sleep_between_retrievals: avg=%f,sleep=%f\n",
- opt.wait, waitsecs));
- xsleep (waitsecs);
- }
+ {
+ /* Sleep a random amount of time averaging in opt.wait
+ seconds. The sleeping amount ranges from 0.5*opt.wait to
+ 1.5*opt.wait. */
+ double waitsecs = (0.5 + random_float ()) * opt.wait;
+ DEBUGP (("sleep_between_retrievals: avg=%f,sleep=%f\n",
+ opt.wait, waitsecs));
+ xsleep (waitsecs);
+ }
}
}
{
struct urlpos *next = l->next;
if (l->url)
- url_free (l->url);
+ url_free (l->url);
xfree_null (l->local_name);
xfree (l);
l = next;
rename(fname, to);
}
-static int no_proxy_match PARAMS ((const char *, const char **));
+static bool no_proxy_match (const char *, const char **);
/* Return the URL of the proxy appropriate for url U. */
if (!opt.use_proxy)
return NULL;
- if (!no_proxy_match (u->host, (const char **)opt.no_proxy))
+ if (no_proxy_match (u->host, (const char **)opt.no_proxy))
return NULL;
switch (u->scheme)
return proxy;
}
+/* Returns true if URL would be downloaded through a proxy. */
+
+bool
+url_uses_proxy (struct url * u)
+{
+ bool ret;
+ if (!u)
+ return false;
+ ret = getproxy (u) != NULL;
+ return ret;
+}
+
/* Should a host be accessed through proxy, concerning no_proxy? */
-int
+static bool
no_proxy_match (const char *host, const char **no_proxy)
{
if (!no_proxy)
- return 1;
+ return false;
+ else
+ return sufmatch (no_proxy, host);
+}
+
+/* Set the file parameter to point to the local file string. */
+void
+set_local_file (const char **file, const char *default_file)
+{
+ if (opt.output_document)
+ {
+ if (output_stream_regular)
+ *file = opt.output_document;
+ }
else
- return !sufmatch (no_proxy, host);
+ *file = default_file;
}
projects / wget / blobdiff