/* Portable timers.
- Copyright (C) 2005 Free Software Foundation, Inc.
+ Copyright (C) 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+ Foundation, Inc.
This file is part of GNU Wget.
GNU Wget is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
+the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
GNU Wget is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with Wget; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-In addition, as a special exception, the Free Software Foundation
-gives permission to link the code of its release of Wget with the
-OpenSSL project's "OpenSSL" library (or with modified versions of it
-that use the same license as the "OpenSSL" library), and distribute
-the linked executables. You must obey the GNU General Public License
-in all respects for all of the code used other than "OpenSSL". If you
-modify this file, you may extend this exception to your version of the
-file, but you are not obligated to do so. If you do not wish to do
-so, delete this exception statement from your version. */
+along with Wget. If not, see <http://www.gnu.org/licenses/>.
+
+Additional permission under GNU GPL version 3 section 7
+
+If you modify this program, or any covered work, by linking or
+combining it with the OpenSSL project's OpenSSL library (or a
+modified version of that library), containing parts covered by the
+terms of the OpenSSL or SSLeay licenses, the Free Software Foundation
+grants you additional permission to convey the resulting work.
+Corresponding Source for a non-source form of such a combination
+shall include the source code for the parts of OpenSSL used as well
+as that of the covered work. */
/* This file implements "portable timers" (ptimers), objects that
measure elapsed time using the primitives most appropriate for the
ptimer_new -- creates a timer.
ptimer_reset -- resets the timer's elapsed time to zero.
ptimer_measure -- measure and return the time elapsed since
- creation or last reset.
+ creation or last reset.
ptimer_read -- reads the last measured elapsed value.
ptimer_destroy -- destroy the timer.
ptimer_granularity -- returns the approximate granularity of the timers.
- Timers measure time in milliseconds, but the timings they return
- are floating point numbers, so they can carry as much precision as
- the underlying system timer supports. For example, to measure the
- time it takes to run a loop, you can use something like:
+ Timers measure time in seconds, returning the timings as floating
+ point numbers, so they can carry as much precision as the
+ underlying system timer supports. For example, to measure the time
+ it takes to run a loop, you can use something like:
ptimer *tmr = ptimer_new ();
while (...)
... loop ...
- double msecs = ptimer_measure ();
- printf ("The loop took %.2f ms\n", msecs); */
+ double secs = ptimer_measure ();
+ printf ("The loop took %.2fs\n", secs); */
-#include <config.h>
+#include "wget.h"
#include <stdio.h>
#include <stdlib.h>
-#ifdef HAVE_STRING_H
-# include <string.h>
-#else /* not HAVE_STRING_H */
-# include <strings.h>
-#endif /* not HAVE_STRING_H */
-#include <sys/types.h>
+#include <string.h>
#include <errno.h>
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
+#include <unistd.h>
+#include <time.h>
+#include <sys/time.h>
+
+/* Cygwin currently (as of 2005-04-08, Cygwin 1.5.14) lacks clock_getres,
+ but still defines _POSIX_TIMERS! Because of that we simply use the
+ Windows timers under Cygwin. */
+#ifdef __CYGWIN__
+# include <windows.h>
#endif
-#include <assert.h>
-#include "wget.h"
+#include "utils.h"
#include "ptimer.h"
-#ifndef errno
-extern int errno;
-#endif
-
-/* Depending on the OS and availability of gettimeofday(), one and
- only one of PTIMER_POSIX, PTIMER_GETTIMEOFDAY, PTIMER_WINDOWS, or
- PTIMER_TIME will be defined. */
+/* Depending on the OS, one and only one of PTIMER_POSIX,
+ PTIMER_GETTIMEOFDAY, or PTIMER_WINDOWS will be defined. */
#undef PTIMER_POSIX
#undef PTIMER_GETTIMEOFDAY
-#undef PTIMER_TIME
#undef PTIMER_WINDOWS
-#ifdef WINDOWS
-# define PTIMER_WINDOWS /* use Windows timers */
+#if defined(WINDOWS) || defined(__CYGWIN__)
+# define PTIMER_WINDOWS /* use Windows timers */
+#elif _POSIX_TIMERS - 0 > 0
+# define PTIMER_POSIX /* use POSIX timers (clock_gettime) */
#else
-# if _POSIX_TIMERS > 0
-# define PTIMER_POSIX /* use POSIX timers (clock_gettime) */
-# else
-# ifdef HAVE_GETTIMEOFDAY
-# define PTIMER_GETTIMEOFDAY /* use gettimeofday */
-# else
-# define PTIMER_TIME
-# endif
-# endif
+# define PTIMER_GETTIMEOFDAY /* use gettimeofday */
#endif
#ifdef PTIMER_POSIX
CLOCK_MONOTONIC where available, CLOCK_REALTIME otherwise. */
static int posix_clock_id;
-/* Resolution of the clock, in milliseconds. */
-static double posix_millisec_resolution;
+/* Resolution of the clock, initialized in posix_init. */
+static double posix_clock_resolution;
/* Decide which clock_id to use. */
int id;
int sysconf_name;
} clocks[] = {
-#if defined(_POSIX_MONOTONIC_CLOCK) && _POSIX_MONOTONIC_CLOCK >= 0
+#if defined(_POSIX_MONOTONIC_CLOCK) && _POSIX_MONOTONIC_CLOCK - 0 >= 0
{ CLOCK_MONOTONIC, _SC_MONOTONIC_CLOCK },
#endif
#ifdef CLOCK_HIGHRES
#endif
{ CLOCK_REALTIME, NO_SYSCONF_CHECK },
};
- int i;
+ size_t i;
/* Determine the clock we can use. For a clock to be usable, it
must be confirmed with sysconf (where applicable) and with
{
struct timespec r;
if (clocks[i].sysconf_name != NO_SYSCONF_CHECK)
- if (sysconf (clocks[i].sysconf_name) < 0)
- continue; /* sysconf claims this clock is unavailable */
+ if (sysconf (clocks[i].sysconf_name) < 0)
+ continue; /* sysconf claims this clock is unavailable */
if (clock_getres (clocks[i].id, &r) < 0)
- continue; /* clock_getres doesn't work for this clock */
+ continue; /* clock_getres doesn't work for this clock */
posix_clock_id = clocks[i].id;
- posix_millisec_resolution = r.tv_sec * 1000.0 + r.tv_nsec / 1000000.0;
- /* Guard against broken clock_getres returning nonsensical
- values. */
- if (posix_millisec_resolution == 0)
- posix_millisec_resolution = 1;
+ posix_clock_resolution = (double) r.tv_sec + r.tv_nsec / 1e9;
+ /* Guard against nonsense returned by a broken clock_getres. */
+ if (posix_clock_resolution == 0)
+ posix_clock_resolution = 1e-3;
break;
}
if (i == countof (clocks))
{
/* If no clock was found, it means that clock_getres failed for
- the realtime clock. */
+ the realtime clock. */
logprintf (LOG_NOTQUIET, _("Cannot get REALTIME clock frequency: %s\n"),
- strerror (errno));
+ strerror (errno));
/* Use CLOCK_REALTIME, but invent a plausible resolution. */
posix_clock_id = CLOCK_REALTIME;
- posix_millisec_resolution = 1;
+ posix_clock_resolution = 1e-3;
}
}
static inline double
posix_diff (ptimer_system_time *pst1, ptimer_system_time *pst2)
{
- return ((pst1->tv_sec - pst2->tv_sec) * 1000.0
- + (pst1->tv_nsec - pst2->tv_nsec) / 1000000.0);
+ return ((pst1->tv_sec - pst2->tv_sec)
+ + (pst1->tv_nsec - pst2->tv_nsec) / 1e9);
}
static inline double
posix_resolution (void)
{
- return posix_millisec_resolution;
+ return posix_clock_resolution;
}
-#endif /* PTIMER_POSIX */
+#endif /* PTIMER_POSIX */
#ifdef PTIMER_GETTIMEOFDAY
/* Elapsed time measurement using gettimeofday: system time is held in
static inline double
gettimeofday_diff (ptimer_system_time *pst1, ptimer_system_time *pst2)
{
- return ((pst1->tv_sec - pst2->tv_sec) * 1000.0
- + (pst1->tv_usec - pst2->tv_usec) / 1000.0);
+ return ((pst1->tv_sec - pst2->tv_sec)
+ + (pst1->tv_usec - pst2->tv_usec) / 1e6);
}
static inline double
than 1ms. Assume 100 usecs. */
return 0.1;
}
-#endif /* PTIMER_GETTIMEOFDAY */
-
-#ifdef PTIMER_TIME
-/* Elapsed time measurement using the time(2) call: system time is
- held in time_t, retrieved using time, and resolution is 1 second.
-
- This method is a catch-all for non-Windows systems without
- gettimeofday -- e.g. DOS or really old or non-standard Unix
- systems. */
-
-typedef time_t ptimer_system_time;
-
-#define IMPL_measure time_measure
-#define IMPL_diff time_diff
-#define IMPL_resolution time_resolution
-
-static inline void
-time_measure (ptimer_system_time *pst)
-{
- time (pst);
-}
-
-static inline double
-time_diff (ptimer_system_time *pst1, ptimer_system_time *pst2)
-{
- return 1000.0 * (*pst1 - *pst2);
-}
-
-static inline double
-time_resolution (void)
-{
- return 1;
-}
-#endif /* PTIMER_TIME */
+#endif /* PTIMER_GETTIMEOFDAY */
#ifdef PTIMER_WINDOWS
/* Elapsed time measurement on Windows: where high-resolution timers
/* Whether high-resolution timers are used. Set by ptimer_initialize_once
the first time ptimer_new is called. */
-static int windows_hires_timers;
+static bool windows_hires_timers;
/* Frequency of high-resolution timers -- number of updates per
- millisecond. Calculated the first time ptimer_new is called
- provided that high-resolution timers are available. */
-static double windows_hires_msfreq;
+ second. Calculated the first time ptimer_new is called provided
+ that high-resolution timers are available. */
+static double windows_hires_freq;
static void
windows_init (void)
QueryPerformanceFrequency (&freq);
if (freq.QuadPart != 0)
{
- windows_hires_timers = 1;
- windows_hires_msfreq = (double) freq.QuadPart / 1000.0;
+ windows_hires_timers = true;
+ windows_hires_freq = (double) freq.QuadPart;
}
}
windows_diff (ptimer_system_time *pst1, ptimer_system_time *pst2)
{
if (windows_hires_timers)
- return (pst1->hires.QuadPart - pst2->hires.QuadPart) / windows_hires_msfreq;
+ return (pst1->hires.QuadPart - pst2->hires.QuadPart) / windows_hires_freq;
else
return pst1->lores - pst2->lores;
}
windows_resolution (void)
{
if (windows_hires_timers)
- return 1.0 / windows_hires_msfreq;
+ return 1.0 / windows_hires_freq;
else
- return 10; /* according to MSDN */
+ return 10; /* according to MSDN */
}
-#endif /* PTIMER_WINDOWS */
+#endif /* PTIMER_WINDOWS */
\f
/* The code below this point is independent of timer implementation. */
time, yields elapsed time. */
ptimer_system_time start;
- /* The most recent elapsed time, calculated by ptimer_measure().
- Measured in milliseconds. */
+ /* The most recent elapsed time, calculated by ptimer_measure(). */
double elapsed_last;
/* Approximately, the time elapsed between the true start of the
{
struct ptimer *pt = xnew0 (struct ptimer);
#ifdef IMPL_init
- static int init_done;
+ static bool init_done;
if (!init_done)
{
- init_done = 1;
+ init_done = true;
IMPL_init ();
}
#endif
}
/* Reset timer PT. This establishes the starting point from which
- ptimer_read() will return the number of elapsed milliseconds.
- It is allowed to reset a previously used timer. */
+ ptimer_measure() will return the elapsed time in seconds. It is
+ allowed to reset a previously used timer. */
void
ptimer_reset (struct ptimer *pt)
pt->elapsed_pre_start = 0;
}
-/* Measure the elapsed time since timer creation/reset and return it
- to the caller. The value remains stored for further reads by
- ptimer_read.
-
- This function causes the timer to call gettimeofday (or time(),
- etc.) to update its idea of current time. To get the elapsed
- interval in milliseconds, use ptimer_read.
+/* Measure the elapsed time since timer creation/reset. This causes
+ the timer to internally call clock_gettime (or gettimeofday, etc.)
+ to update its idea of current time. The time is returned, but is
+ also stored for later access through ptimer_read().
This function handles clock skew, i.e. time that moves backwards is
ignored. */
return elapsed;
}
-/* Return the elapsed time in milliseconds between the last call to
- ptimer_reset and the last call to ptimer_update. */
+/* Return the most recent elapsed time measured with ptimer_measure.
+ If ptimer_measure has not yet been called since the timer was
+ created or reset, this returns 0. */
double
ptimer_read (const struct ptimer *pt)
}
/* Return the assessed resolution of the timer implementation, in
- milliseconds. This is used by code that tries to substitute a
- better value for timers that have returned zero. */
+ seconds. This is used by code that tries to substitute a better
+ value for timers that have returned zero. */
double
ptimer_resolution (void)
projects / wget / blobdiff